Register your product and get support at
SE658
US-EN Telephone Répondeur
Warning
Use only rechargeable batteries.
Charge the handset for 24 hours before use.
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
Table of contents
1
Important Safety
Instructions
5.4
Overview of the
5
base station
20
2.7
Equipment Approval
Information
6
Conventions Used in
this Manual
22
24
24
9
9
9
Appareils auditifs Compatibility
2.9
(HAC)
11
2.10
FCC RF Radiation
Exposure Statement
11
33
33
33
33
3.2
Electric, Magnetic and
(“EMF”)
13
34
34
34
Table of contents
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
1
35
41
10.1
Store a contact in the
35
35
phonebook
Select phonebook melody
42
10.4
9
Use more of
(Handset only)
43
your phone
Handset keypad
lock/unlock
37
10.6
Delete all phonebook
9.2
entries
43
37
44
44
38
Save call list entry into the
phonebook
38
38
45
11.2
46
39
39
39
12.1
Change the Handset Name
(Handset only)
47
47
47
39
48
Table of contents
2
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
12.4
12.5
Select the Display
Wallpaper (Handset only) 48
Select the Color Theme
(Handset only)
Set the Backlight Time
14.3
Call Forward when
Unanswered
58
59
59
49
12.7
(Handset only)
Deactivate/Activate Auto
Hang-Up (Handset only) 49
49
14.3.1
Change Call Forward when
Unanswered Activation
12.8
59
14.3.2
Change Call Forward when
Unanswered Deactivation
60
60
60
61
50
51
53
53
61
61
62
62
62
15
Telephone answering
machine (TAM)
57
63
57
63
Table of contents
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
3
15.2
Delete all messages
(Handset only)
64
64
15.3
Turn the Answering
Handset (Handset only)
Play, Record, or Delete an
Outgoing Message
Répondeur
Settings
64
15.4
64
15.6
65
65
66
67
67
17
Frequently asked
questions
68
Table of contents
4
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
indicated on the marking label. If
you are not sure of the type of
power supply to your home, consult
your dealer or local power
company.
1 Important Safety
Instructions
7
Do not allow anything to rest on
the power cord. Do not locate this
product where the cord will be
abused by persons walking on it.
Do not overload wall outlets and
extension cords as this can result in
the risk of fire or electric shock.
Never push objects of any kind into
this product through cabinet slots as
they may touch dangerous voltage
points or short out parts that could
result in a risk of fire or electric
shock.
Some of the following information may
not apply to your particular product;
however, when using telephone
equipment, basic safety precautions
should always be followed to reduce the
risk of fire, electric shock and injury to
persons, including the following:
8
9
1
2
3
Read and understand all
instructions.
Follow all warnings and instructions
marked on the product.
Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Telephones should not be used
while you are in a bathtub, shower
or pool. Immersion of the
Never spill liquid of any kind on the
product.
10 To reduce the risk of electric shock,
do not disassemble this product, but
take it to a qualified service
4
5
personnel when service or repair
work is required. Opening or
removing covers may expose you to
dangerous voltages or other risks.
Incorrect reassembly can cause
electric shock when the appliance is
subsequently used.
telephone or handset in water could
cause an electrical shock.
Slots and openings in the cabinet
back or bottom are provided for
ventilation, to protect it from
overheating.These openings must
not be blocked or covered. The
openings should never be blocked
by placing the product on the bed,
sofa, rug, or other similar
11 Do not expose the product to
extreme temperatures such as areas
near a hot radiator or stove or in a
hot car.
surface.This product should not be
placed in a built-in installation unless
proper ventilation is provided.
This product should be operated
only from the type of power source
12 Do not place lighted candles,
cigarettes, cigars, etc., on the
telephone.
13 Never touch uninsulated telephone
wires or terminals unless the
6
Important Safety Instructions
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
5
telephone line has been
disconnected at the network
interface.
ADDITIONAL PRECAUTIONS
SHOULD BE OBSERVED:
1
Use only the type and size of
battery(ies) specified in the user
manual.
14 Never install or modify telephone
wiring during a lightning storm.
15 Never install telephone jacks in wet
locations unless the jack is
2
Do not dispose of the battery(ies)
in fire. They may explode. Check
with local codes for possible special
disposal instructions.
specifically designed for wet
locations.
16 Use caution when installing or
modifying telephone lines to
prevent electrical shock and/or fire.
17 Unplug this product from the wall
outlet and refer servicing to
qualified service personnel under
the following conditions:
3
4
Do not open or mutilate the
battery(ies). Released electrolyte is
corrosive and may cause damage to
the eyes or skin. It may be toxic if
swallowed.
Exercise care in handling
battery(ies) in order not to short
out the battery(ies) with conducting
materials such as rings, bracelets,
and keys.The battery(ies) or
conductor may overheat and cause
burns.
Do not attempt to recharge the
battery(ies) provided with or
identified for use with this product
that are not intended to be
charged.The battery(ies) may leak
corrosive electrolyte or explode.
Do not attempt to rejuvenate the
battery(ies) provided with or
identified for use with this product
by heating them. Sudden release of
the battery(ies) electrolyte may
occur causing burns or irritation to
eyes or skin.
A
B
C
When the power supply cord or
plug is damaged or frayed.
If the product has been exposed to
rain or water.
If the product does not operate
normally by following the operating
instructions.
5
6
D
E
If the product’s cabinet has been
damaged.
If the product exhibits a distinct
change in performance.
18 Avoid using a telephone (other than
a cordless type) during an electrical
storm. There may be a remote risk
of electric shock from lightning.
19 Do not use the telephone to report
a gas leak in the vicinity of the leak.
20 Do not place this product on an
unstable cart, stand or table.The
product may fall, causing serious
damage to the product.
7
When replacing battery(ies), all
batteries should be replaced at the
same time. Mixing fresh and
discharged batteries could increase
internal cell pressure and rupture
IF YOUR PRODUCT UTILIZES
BATTERIES,THE FOLLOWING
Important Safety Instructions
6
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
the discharged battery(ies). (Applies
to products employing more than
one separately replaceable primary
battery.)
2
Environment and
safety
8
9
When inserting battery(ies) into
this product, the proper polarity or
direction must be observed.
Reverse insertion of battery(ies) can
cause charging, and that may result
in leakage or explosion.
Remove battery(ies) from this
product if storing over 30 days
because the battery(ies) could leak
and damage the product.
2.1
Safety information
This telephone is not designed for
making emergency telephone calls when
the power fails. An alternative should be
made available for access to emergency
calling.
10 Discard “dead” battery(ies) as soon
as possible since “dead” batteries
are more likely to leak in a product.
11 Do not store this product, or the
battery(ies) provided with or
identified for use with this product,
in high temperature areas.
2.2
Power requirements
This product requires an electrical supply
of 120 volts, single phase alternating
current, excluding IT installations defined
in standard UL 60950.
Batteries that are stored in a freezer
or refrigerator for the purpose of
extending shelf life should be
protected from condensation during
storage and defrosting. Batteries
should be stabilized at room
2.3
Battery requirements
The handset requires power source of
two rechargeable NiMH batteries, size
AAA 1.2V 600mAh (Hr11/45). IF THE
INCORRECT TYPE OF BATTERIES ARE
USED,A WARNING MESSAGE WILL BE
DISPLAYED.
Use only Philips Multi-Life 600mAh
rechargeable NimH batteries.
For servicing or replacement, you can
purchase a suitable headset through
service centre or retail shop.
temperature prior to use after cold
storage.
12 If your product uses rechargeable
battery(ies), charge the battery(ies)
only in accordance with the
instructions and limitation specified
in the Manuel de l'utilisateur.
SAVE THESE INSTRUCTIONS
2.4
Telephone connection
The voltage on the network is classified
as TNV- 3 (Telecommunication Network
Voltages, as defined in the standard UL
Environment and safety
7
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
60950). Following a power cut, the call in
progress is lost.
aids may experience interference in
the form of a humming noise.
We advise that this phone should not
be used near intensive care medical
equipment, nor by persons with
pacemakers.
Your phone can interfere with
electrical equipment such as
answering machines, TV and radio
sets, clock radios and computers if
placed too close. It is recommended
that you position the base unit at least
one meter from such appliances.
Caution
Caution
•
•
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe system, if present, are
connected together. This precaution may
be particularly important in rural areas.
2.5
Environmental care
Please remember to observe the local
regulations regarding the disposal of your
packaging materials, exhausted batteries
and old phone and where possible
promote their recycling.
Use only the mains adapter supplied with
this telephone. Incorrect adapter polarity
or voltage can seriously damage the unit.
Base adapter:
Input: 100 V - 240 VAC 50/60 Hz
Output: 6 VDC 500 mA
2.6
Precautions
Charger adapter:
•
Do not allow the handset to come
into contact with liquids or moisture.
Do not open the handset, base station
or charger. This could expose you to
high voltages.
Do not allow the charging contacts of
the charger or the battery to come
into contact with extraneous
Input: 100 V - 240 VAC 50/60 Hz
Output: 6 VDC 210 mA
•
Caution
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
Never use non-rechargeable batteries;
use recommended type supplied with
this telephone. NiMH batteries must be
disposed of in accordance with the
applicable waste disposal regulations.
•
•
conductive materials.
There is a slight chance that the
telephone could be damaged by an
electrical storm. It is recommended
that users unplug the phone from the
USB socket and the phone line from
the phone wall socket during a storm.
Because the phone works by sending
radio signals between the base unit
and the handset, wearers of hearing
FCC CERTIFICATION NUMBER IS
LOCATED ON THE CABINET
BOTTOM
The term “IC:” before the certification
number signifies that Industry Canada
technical specifications were met.This
certification means that the equipment
•
Environment and safety
8
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
meets certain radio communications and
operational requirements.
applicable FCC Part 68 rules and
requirements adopted by the ACTA.
A compliant telephone cord and modular
plug is provided with this product. It is
designed to be connected to a
compatible modular jack that is also
compliant. See installation instructions
for details.
2.7
Equipment Approval
Information
Your telephone equipment is approved
for connection to the public switched
telephone network and is in compliance
with parts 15 and 68, FCC Rules and
Regulations and the Technical
Notes
•
This equipment may not be used on
coin service provided by the
telephone company.
Requirements for Telephone Terminal
Equipment published by ACTA.
•
Party lines are subject to state tariffs,
and therefore, you may not be able to
use your own telephone equipment if
you are on a party line. Check with
your local telephone company.
Notice must be given to the
telephone company upon permanent
disconnection of your telephone from
your line.
If your home has specially wired alarm
equipment connected to the
telephone line, ensure the installation
of this product does not disable your
alarm equipment. If you have
questions about what will disable
alarm equipment, consult your
telephone company or a qualified
installer.
2.7.1 Notification to the Local
Telephone Company
On the bottom of this equipment is a
label indicating, among other
information, the US number and Ringer
Equivalence Number (REN) for the
equipment.You must, upon request,
provide this information to your
•
•
telephone company.
The REN is useful in determining the
number of devices you may connect to
your telephone line and still have all of
these devices ring when your telephone
number is called. In most (but not all)
areas, the sum of the RENs of all devices
connected to one line should not exceed
5. To be certain of the number of devices
you may connect to your line as
determined by the REN, you should
contact your local telephone company.
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
2.7.2 Rights of the Phone
Company
Should your equipment cause trouble on
your line which may harm the telephone
network, the telephone company shall,
where practicable, notify you that
Environment and safety
9
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
temporary discontinuance of service may
be required.Where prior notice is not
practicable and the circumstances
warrant such action, the telephone
company may temporarily discontinue
service immediately. In case of such
temporary discontinuance, the telephone
company must:
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
(1) promptly notify you of such
temporary discontinuance; (2) afford you
the opportunity to correct the situation;
and (3) inform you of your right to bring
a complaint to the Commission pursuant
to procedures set forth in Subpart E of
Part 68, FCC Rules and Regulations.
The telephone company may make
changes in its communications facilities,
equipment, operations or procedures
where such action is required in the
operation of its business and not
inconsistent with FCC rules and
Regulations. If these changes are
expected to affect the use or
•
•
•
Reorient or relocate the receiving
antenna (that is, the antenna for radio
or television that is “receiving” the
interference).
Reorient or relocate and increase the
separation between the
telecommunications equipment and
receiving antenna.
Connect the telecommunications
equipment into an outlet on a circuit
different from that to which the
receiving antenna is connected.
performance of your telephone
equipment, the telephone company must
give you adequate notice, in writing, to
allow you to maintain uninterrupted
service.
2.8
Interference Information
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful
interference; and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
If these measures do not eliminate the
interference, please consult your dealer
or an experienced radio / television
technician for additional suggestions.
Also, the Federal Communications
Environment and safety
10
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
Commission has prepared a helpful
booklet, “How To Identify and Resolve
Radio/TV Interference Problems”. This
booklet is available from the U.S.
Government Printing Office,
3
Important
Take time to read this user manual
before you use your phone. It contains
important information and notes
regarding your phone.
Washington, D.C. 20402.
Please specify stock number 004-000-
00345-4 when ordering copies.
Notice: The changes or modifications
not expressly approved by the party
responsible for compliance could void
the user’s authority to operate the
equipment.
NOTICE: This product meets the
applicable Industry Canada technical
specifications.
The equipment must be installed using an
acceptable method of connection. The
customer should be aware that
compliance with the above conditions
may not prevent degradation of service
in some situations.
Repairs to certified equipment should be
made by an authorized Canadian
maintenance facility designated by the
supplier. Any repairs or alterations made
by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to
request the user to disconnect the
equipment.
2.9
Appareils auditifs Compatibility
(HAC)
This telephone system meets FCC and
Industry Canada standards for Hearing
Aid Compatibility.
2.10 FCC RF Radiation Exposure
Statement
This equipment complies with FCC RF
radiation exposure limits set forth for an
uncontrolled environment.This
equipment should be installed and
operated with a minimum distance of
20 centimeters between the radiator and
your body.This transmitter must not be
co-located or operating in conjunction
with any other antenna or transmitter.
For hand held operation, this phone has
been tested and meets the FCC RF
exposure guidelines. Use of other
accessories may not ensure compliance
with FCC RF exposure guidelines.
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe systems, if present, are
connected together. This precaution may
be particularly important in rural areas.
CAUTION: Users should not attempt to
make such connections themselves, but
should contact the appropriate electric
inspection authority, or electrician, as
appropriate.
Important
11
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
NOTES: This equipment may not be used
on coin service provided by the
telephone company.
a very high level: make sure the
handset is not too close to your ear.
This equipment is not designed to
make emergency calls when the
power fails. An alternative has to be
made available to allow emergency
calls.
Do not expose the phone to
excessive heat caused by heating
equipment or direct sunlight.
Do not drop your phone or allow
objects to fall on your phone.
Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the
set.
•
•
3.1
Power requirements
•
This product requires an electrical
supply of 100-240 volts AC. In case of
power failure, the communication can
be lost.
•
The Electrical network is classified as
hazardous. The only way to power
down the charger is to unplug the
power supply from the electrical
outlet. Ensure that the electrical
outlet is always easily accessible.
The voltage on the network is
classified as TNV-3
•
•
•
•
•
Do not use the product in places
where there are explosive hazards.
Do not let small metal objects come
into contact with the product. This
can deteriorate audio quality and
damage the product.
(Telecommunication Network
Voltages), as defined in the standard
UL 60950.
Warning
To avoid damage or malfunction:
•
Active mobile phones in the vicinity
may cause interference.
•
Do not allow the charging contacts or
the battery to come into contact with
metal objects.
About operating and storage
temperatures:
•
•
•
Do not open it as you could be
exposed to high voltages.
Do not allow the charger to come
into contact with liquids.
Never use any other battery than the
one delivered with the product or
recommended by Philips: risk of
explosion.
•
•
•
Operate in a place where
temperature is always between 0 and
35º C (32 to 95º F).
Store in a place where temperature is
always between -20 and 70º C (-4 to
158º F).
Battery life may be shortened in low
temperature conditions.
•
•
Always use the cables provided with
the product.
Handsfree activation could suddenly
increase the volume in the earpiece to
Important
12
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
3.2
Electric, Magnetic and
Electromagnetic Fields
(“EMF”)
®
4
The RBRC seal
1. Philips Royal Electronics
manufactures and sells many
The RBRC® Seal
on the nickel metal
hydride battery
indicates that
Philips Royal
consumer oriented products which
usually, as with any electronic
apparatus, have the ability to emit
and receive electro magnetic signals.
2. One of Philips’ leading Business
Principles is to take all necessary
health and safety precautions for
our products, to comply with all
applicable legal requirements and to
stay well within the EMF standards
applicable at the time of producing
the products.
3. Philips is committed to develop,
produce and market products that
cause no adverse health effects.
4. Philips confirms that if its products
are handled properly for their
intended use, they are safe to use
according to scientific evidence
available today.
Electronics is
voluntarily
participating in an industry program to
collect and recycle these batteries at the
end of their useful lives, when taken out
of service within the United States and
Canada.
The RBRC® program provides a
convenient alternative to placing used
nickel metal hydride batteries into the
trash or municipal waste, which may be
illegal in your area.
Philips’s participation in RBRC® makes it
easy for you to drop off the spent battery
at local retailers participating in the
RBRC® program or at authorized Philips
product service centers.
Please call 1-800-8-BATTERY for
information on Ni-MH battery recycling
and disposal bans/restrictions in your
area. Philips’s involvement in this
program is part of its commitment to
protecting our environment and
conserving natural resources.
RBRC® is a registered trademark of
Rechargeable Battery Recycling
Corporation.
5. Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments
in standardisation for early
integration in its products.
3.3
Recycle your batteries
Do not dispose your rechargeable
batteries. Call the toll fee number 1-800-
822-8837 to get instructions on how to
recycle your batteries.
The RBRC® seal
13
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
The RBRC® seal
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
15
5
Your phone
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at
5.1
What’s in the box
Handset with belt clip
Base Station
Battery door
Bracket for wall
2 AAA
Power supply
Line cord
mounting
rechargeable
batteries
User manual
Note
Guarantee
Do not return
leaflet
Quick Start
Guide
In multihandset packs, you will find one or more additional handsets, chargers with power
supply units and additional rechargeable batteries.
Your phone
16
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
5.2
Overview of your handset
C
Display
display icons.
A
D
Select key o
B
Select the function displayed on the
screen or go to the next lower level in a
menu. Also used to confirm entries (for
example when setting date and time).
E
Back/Clear key c
C
Press to clear (delete) a character or
number when making an entry. Long
press to clear all.
When navigating menus, press to move
to the previous higher menu level (Back
is displayed).
D
E
F
G
H
F
Navigation keys n
In idle mode: Scroll up uto access the
Call log and scroll down dto access
the Phonebook.
During a call: Scroll nto increase or
decrease earpiece and speaker volume.
Editing and entry: Move to the previous
character uor next character d.
In other modes: Scroll up uand down
d a menu list or go to the previous
or next record in the Phonebook, Redial
list, or Call log.
G
Talk key t
A
Event LED
In idle mode: Make an external call or
answer an incoming external or internal
call.
During a call: Activate the flash function.
In other modes: Dial the selected
number in the Phonebook, Redial list, or
Call log.
The event LED on your handset blinks
when there is a new message recorded
on your telephone answering machine. If
you have subscribed to Caller Line
Identification, the event LED also blinks
when there is a new call, or a new voice
mail message.
H
Hang-up/Exit key h
B
Earpiece
In idle mode: Long press (5 seconds) to
switch off the handset.
Your phone
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
17
When the handset is switched off: Long
press (1 second) to switch it on.
During a call: Hang up a call.
In other modes: Press to return to idle
mode.
R
S
I
Menu key m
In idle mode: Go to the main menu.
Redial key r
Access the Redial list in idle mode.
Loudspeaker key l
T
J
I
J
K
K
In idle mode: Turn on the loudspeaker
and dial the number. Answer an incoming
call using handsfree mode.
During a call: Toggle the loudspeaker on/
off.
L
U
M
N
O
P
Q
L
Number keys
Use to dial numbers and write characters.
With key 1, a long press dials your
voice mail subscriber access number.
With keys 3to 9, a long press dials
one of your direct memory access
numbers.
O
Mute key s
When off hook: Deactivate/activate the
microphone.
P
Call transfer key & Intercom
key i
In idle mode: Initiate an internal call.
M
*/Keypad lock & Format key * During a call: Short press to hold the line
In idle mode: Long press to lock/ unlock
keypad.
Predialling or editing: Press to enter a “*”.
Off hook: Long press to temporarily
switch to tone (DTMF) dialling if using
pulse.
and page another handset. Long press to
set up a conference between an external
call and two handsets.
Q
R
S
Microphone
Belt clip
Loudspeaker (underneath the
belt clip)
During call log display: Toggles area code
and long distance display on/off.
Warning
N
#/Ringer on/off & Pause key #
Handsfree activation can suddenly
increase the volume of the earpiece to a
very high level. Make sure the handset is
not too close to your ear.
In idle mode: Long press to turn the
ringer on/off.
Dialling or editing: Long press to insert a
pause (during predialling) and short press
to insert a “#”.
T
Headset jack
Battery door
U
Editing: Short press to switch upper/
lower case.
Your phone
18
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
5.3
Display icons and Messages
Steady on when the answering
machine is on. Blinks when
messages have been received by
the answering machine; blinks
rapidly when answering machine
memory is full.
Indicates that the battery is fully
charged. This icon blinks during
charge and when the battery is
low.
When the Icon is empty the
battery is practically discharged.
Note
Indicates that the handset is
registered and within range of
the base station. Icon blinks
when the handset is out of
range or is searching for a base.
Select/ Select appears when in menu
If Warning Batt flashes together
with a blinking battery icon,
batteries of the wrong type are
installed in the handset. Replace
with batteries of the correct type.
Blinks when there is an incoming
call. Steady On during a call.
If you subscribe to voice mail
service, blinks when there is
new voice mail.
Blinks when there are new and
missed calls in the call log
records.
Appears when the alarm clock
is activated. Blinks when the
alarm time comes.
OK
mode. Press the key directly below
to move to the next menu level or
to confirm a selection.
OK appears to request
confirmation of an operation. Press
the key directly below to confirm.
Indicates that more options are
available in a scroll list, or that
you can adjust the volume.
Back/ Back appears when in menu mode.
Clear Press the key directly below to
return to the previous menu level.
Clear appears when making an
entry. Press the key directly below
to clear (delete) a character or
number when making an entry.
Long press to clear all.
Appears when the loudspeaker
is activated.
Appears when the ringer is off.
Your phone
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
19
5.4
Overview of the base station
Top
A
B
C
E
G
I
K
M
D
F
H
Bottom
J
L
N
O
P
Q
R
V
U
T
S
A
Handset locator key a
In menu mode: Go to the previous level
in a menu.
Locate handset.
Long press more than 3 seconds to start
the registration procedure.
H
Erase Key x
During message playback: Short press to
delete the current message.
In idle mode: Long press to delete all old
messages.
B
Display
See 5.5 for an overview of the display.
C
D
Speaker
Play/Stop key p
I
Menu key m
Enter/exit the main menu.
Phonebook/Down key d
Play phone messages (the first message
recorded will be played first). Voice
prompts are played between messages
and when all messages have been played.
Stop message playback.
J
In idle mode: Enter the phonebook.
In menu mode: Scroll down in the list.
K
On/Off Key e
E
Previous/Select Key c
Short press to switch the answering
During message playback: Go to the
machine on/off.
previous message.
L
Event LED
In menu mode: Select the function
displayed on the screen or go to the next
lower level in a menu.
The event LED on the base blinks during
handset locating. It is steady on when a
handset has taken the line.
F
Call log/Up key u
M
Volume Keys +-
In idle mode: Enter the call log.
In idle mode: Increase or decrease the
In menu mode: Scroll up in the list.
ring volume.
G
Back/Clear Key c
During a conversation or during message
playback: Increase or decrease the
speaker volume.
During message playback: Go to the next
message.
Your phone
20
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
N
Speaker key l
5.5
Base station display
In idle mode: Pick up the line with the
speaker on.
During a call: End the call. The speaker
key LED blinks when receiving an
incoming call. It is steady on when the
base is in talk mode.
A
B
TUE 12:00 AM
01/01/2008
Softkey 1
Softkey 2
O
Hold/Intercom key i
C
D
In idle mode: Initiate an internal call.
During a call: Put the external call on
hold to initiate an internal call.
A
Main display area
In idle mode: Displays the time and date
or new events.
P
Mute key s
When off hook: Mute/Unmute the
microphone.
In menu mode: Displays the options in
the menu.
Q
Redial key r
B
Ringer Off Icon
Access the Redial list.
Turns on when the ringer volume is set
to zero.
R
Flash/Call waiting t
Send a flash on the line. If there is an
C
Soft keys
incoming call waiting, answer the call.
Soft key 1 is activated by the Previous/
Select key. Soft key 2 is activated by the
Back/Clear key.
S
Number keys
Short press to dial numbers.
Long press keys 3 to 9 to dial a
direct access memory number.
D
Sub-screen display area
Action
Off
Meaning
The answering machine is off.
T
Hash key #
Short press to enter a ‘#’.
Long press to enter a pause.
Blinking Shows the number of new
messages only.
U
Star/format key *
Steady
on
Shows the number of old
messages. (When there are
no new messages.)
Enter a ‘*’.
When viewing the call log, press to
change the number format (see page 45,
When
Two horizontal bars “--”
memory blink. (Only when there are
is full
no new messages.) The
maximum capacity is 59
messages.
V
Microphone (at the bottom
front of the base station)
During
An “AA” blinks during
remote remote access or when a
access
handset is playing answering
machine messages.
Your phone
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
21
Action
When
recording rim when recording an
incoming or outgoing
message.
Meaning
A segment scrolls around the
Key on
Handset
c
i
*
Key on
Base Station
Right c key
i
*
When
Shows the base volume level
#
#
adjusting when adjusting the volume.
volume
These keys are used to access the main
menu and utilize functions such as redial
and caller ID.
6
Conventions Used
in this Manual
•
Terminology
When a procedure applies equally to the
handset and the base station, the word
“unit” is used to indicate both.
•
Scrolling
This manual uses the following
conventions.
“Scroll n” means to use the uand
d keys on the handset or the u
and d keys on the base station to
scroll through a menu or list on the
display screen.
•
Bold text
Bold text is used for messages and
instructions that are shown on the
handset or base display screen.
•
Handset and Base Station Keys
Note: See Section 5 for detailed
Except where indicated otherwise, basic
operation is the same for both the
handset and base station of this product.
However, for some functions the keys
used on the handset and base station
have different shapes or different
lettering.
The procedures in this manual use the
handset key icons. This table shows the
corresponding keys for the base station.
Refer to it when needed.
descriptions of the functions and use of
the keys of the handset and base station.
7
Getting started
7.1
1
Connect the base station
Place the base station in a central
location near the telephone line
socket and electricity socket.
Connect the line cord and the
power cable to their corresponding
Key on
Handset
u
Key on
Base Station
u
d
2
d
Left c key
o
Conventions Used in this Manual / Getting started
22
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
connectors at the back of the base
station.
sound quality. Buildings with thick
internal and external walls may impair
transmission of signals to and from the
base.
Warning
Power is applied when the power
adaptor is plugged into the unit and
connected to the electricity socket. The
only way to power down the unit is to
unplug the power adaptor from the
electricity socket. Therefore, ensure that
the electricity socket is easily accessible.
The power adaptor and telephone line
cord have to be connected correctly, as
incorrect connection could damage the
unit. Always use the telephone line cord
supplied with the unit. Otherwise, you
may not get a dial tone.
3
Connect the other end of the line
cord and power cable to their
respective sockets.
7.2
Wall mounting the base
The base is designed to support wall
mounting. To wall mount the base, follow
the instructions below.
1
Attach the bracket to the base
station as shown below.
Note
The line adaptor may not be attached to
the line cord. In this case, you have to
connect the line adaptor to the line cord
first before plugging the line cord to the
line socket.
Warning
Avoid placing the base station too close
to large metal objects such as filing
cabinets, radiators or electrical
appliances. This can impair the range and
Getting started
23
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
2
Use the pedestal wall mounting to
plug your base station.
batteries are used instead of
rechargeable batteries, “Warning
Batt” will show on the display and the
battery icon will blink quickly.
1
Slide out the battery cover.
2
Place the batteries in the correct
polarity as indicated and replace the
cover.
5.20
83.00
17.00
5.20
7.3
Install your phone
Before using the handset, the batteries
have to be installed and fully charged.
Warning
When the batteries are inserted for the
first time, the unit will not be able to
start normally due to the low battery.
You must charge the batteries on the
base station before you can use the
handset.
7.3.2 Charge battery
Warning
The handset must be charged for at least
24 hours before using it for the first time.
When the battery level becomes low, the
low battery sensor warns you by blinking
the battery icon. If this occurs during a
conversation, an alert tone sounds to
inform you that the battery is low. If the
battery level becomes exceedingly low,
the phone automatically switches off
shortly after the icon starts blinking and
any function in progress will not be
saved.
7.3.1 Install battery
Warning
Always use AAA rechargeable batteries
supplied with your unit. If alkaline
Getting started
24
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
1
Place the handset on the charging
cradle of the base station. A beep is
emitted if the handset is placed
correctly.
2
3
The battery icon
blinks during charge.
The battery icon
on the display
becomes steady
when the handset is fully charged.
Note
7.5
Install optional headset
Optimal battery life is reached after 3
cycles of complete charging (over 15
hours) and discharging, allowing
approximately 12 hours of talk-time and
150 hours of stand-by time.
Your phone may be used with an optional
headset (not included in the box). To use
this feature, insert the headset plug into
the headset jack. Your phone is ready for
hands-free conversations.
The indoor and outdoor range of the
phone is up to 50 metres and 300 metres
respectively. When the handset moves
beyond the operation range, the antenna
Diameter: 2.5 mm
icon
will blink.
Tip
When you reach the range limit the
conversation may become crackly. Move
closer to the base.
7.6
Power up
On the base, the screen below is shown
during power up.
7.4
Remove/Attach belt clip
Welcome
A belt clip allows you to carry your
handset on your belt.
Please Wait...
1
To remove the belt clip, simply pull
the clip away from the handset.
To attach the belt clip to your
handset, fit the tabs on the belt clip
into the slots at the back of the
handset and push into place.
2
TUE 00:01 AM
01/01/2008
The handset will start searching and the
backlight will turn on.
Getting started
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
25
Handset screen
Searching...
01/01
00:01
The display will show the word
“Searching” and Antenna icon flashing
until it locks onto its subscribed. Then
the display shows the standby display.
7.7
Using multipacks
If you have purchased a multipack you
will have additional handsets, chargers,
power adaptors and AAA rechargeable
batteries.
1
2
3
Plug the chargers into a power
socket.
Install the batteries supplied into the
handsets.
Place the handsets on the chargers
to charge the batteries.
Getting started
26
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
7.8
Handset menu structure
The SE658 has six menus as shown in the following table.
Menu Name
Icon
1
2
3
4
5
6
Phonebook
Personal Settings
Clock and Alarm
Advanced Settings
Network Services
Answer Machine
Press the menu key mto enter menu mode. Use navigation keys nto navigate
within the menus and all submenus.
Press o Select to enter the next lower menu level. Press cBack to go to the
previous menu level.
The charts below show the menu trees of your phone.
Phonebook
Phonebook
New Entry
List
Enter Name:
Enter Number:
Entry list displayed
Edit Entry
Select Melody
(Handset only)
Delete
Entry list displayed
Melody details
for selected entry
Delete?
List of melodies
Entry list displayed
Delete All?
Delete All
Direct Memory
Key list and status
Edit
Delete
Getting started
27
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
Personal Settings
Personal Set
Handset Name
(Handset only)
HandsetTones
or BaseTones
Enter name
RingVolume
No bar (off)
One bar
(Handset only)
…
Five bars
Progressive
(Handset)
Name of tones 1
…
RingTones
Name of tones 15
(Base station)
Name of tones 1
…
Name of tones 5
On
Key Beep
Off
Langue
List of languages
Wallpaper 1
Wallpaper 2
Wallpaper 3
Wallpaper off
Color 1
…
Wallpaper
(Handset only)
ColorTheme
(Handset only)
Color 4
Level 1
Contrast
…
Level 5
BacklightTime
(Handset only)
20 Seconds
40 Seconds
60 Seconds
On
Auto Hang-up
(Handset only)
Off
Getting started
28
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
Clock and Alarm
Clock & Alarm
(Handset)
Set Date/Time
Set Format
Enter date & time
Time Format
12 Hours
24 Hours
DD/MM
MM/DD
or
Clock (Base station)
Date Format
Alarm
Off
(Handset only)
On Once
On Daily
Melody 1
Melody 2
Melody 3
AlarmTone
(Handset only)
Getting started
29
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
Advanced Settings (Handset only)
Advanced Set
(Handset only)
Easy Call
Mode
On
Enter Number:
Off (by default)
Enter number
Number
On (by default)
Off
Conference
Call Barring
Enter PIN
Mode
On
Off (by default)
Number 1
…
Number
Number 4
XHD Sound
On (by default)
Off
Change PIN
Register
Unregister
Reset
Reset?
Enter number
Detect Digit:
Short
Area Code
Auto Prefix
FlashTime
Prefix
Long
Dial Mode
First Ring
Tone
Pulse
On
Off
Getting started
30
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
Network Services (Handset only)
Netw. Services
(Handset only)
Call Forward
Call Fwd Busy
Call Fwd Unans
Activate
Enter Number:
Activation
Deactivate
Change Code
Prefix (enter code)
Suffix (enter code)
Change Code
Deactivation
Activate
Enter Number:
Deactivate
Change Code
Activation
Prefix (enter code)
Suffix (enter code)
Change Code
Deactivation
Activate
Enter Number:
Deactivate
Change Code
Activation
Prefix (enter code)
Suffix (enter code)
Change Code
Deactivation
Enter Number
Enter Number
Enter Number
Enter Number
Enter Number
Enter Number
Enter Number
Voicemail
Voicemail 2
Info
Call
Settings
Call
Settings
Call
Settings
Call
Info 2
Settings
Call
Call Return
Cancel Call BK
Withhold ID
Settings
Call
Settings
Activate
Settings
Getting started
31
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
Answer Machine
Answer Machine
Play
Repeat
Next
(Handset only)
Previous
Delete
Delete All
(Handset only)
Answer On/Off
(Handset only)
Record OGM
On
Off
Answer & Rec.
Play
Record Message
Delete
Answer Only
Play
Record Message
Delete
Answer Mode
Settings
Answer & Rec.
Answer Only
Ring Delay
3 Rings
4 Rings
5 Rings
6 Rings
7 Rings
8 Rings
Economy
Activate
Remote Access
Deactivate (by default)
On
HS Screening
(Handset only)
Voice Langue
Off (by default)
List of languages
Getting started
32
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
Note
8
Using your phone
•
•
The handset(s) and base station each
have their own redial list.
You can also press tor l(or
l on the base station) first and
then press cRedial to enter the
redial list. Then scroll nto select a
number in the list and press o
Select. The number is dialed
automatically.
8.1
Make a call
8.1.1 Predialling
1
2
Enter the number. (A maximum of
24 digits including * and # are
allowed. Press c Clear to delete
the last digit.) Or long press to
delete all.
From the handset: Press t. (Or
press lon the handset to start a
call in speaker mode.)
8.1.4 Call from the call log
Note
•
The call log is shared between
handset(s) and the base station.
You need to subscribe to Caller Line
Identification service to be able to see
the caller’s number or name in the call
log. See section 11.1 - “Access the
From the base: Press
l.
•
•
The call is initiated.
8.1.2 Direct dialling
1
From the handset: Pick up the
handset and press t. (Or press
lon the handset to start a call in
speaker mode.)
1
Press u in idle mode, then scroll
nto an entry in the call list.
Note
If the list is empty, then “List Empty” is
displayed.
From the base: Press
Dial the number.
l.
2
2
Press tor l(or l on the
•
The call is initiated.
base station).
•
The call is initiated (with
loudspeaker on if from the base
station).
8.1.3 Call from redial list
1
Press rin idle mode.
2
Scroll nto an entry in the redial
list.
8.1.5 Call from the phonebook
3
Press t or l(or l on the
base station).
1
2
3
Press din idle mode.
Scroll nto a phonebook entry.
Press tor l(or l on the
base station).
•
The call is initiated (with
loudspeaker on if from the base
station).
•
The call is initiated.
Using your phone
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
33
8.2
Answer a call
Danger
Tip
Instead of scrolling nto browse the
phonebook entries, you can press the
numeric key corresponding to the first
letter of the entry you wish to locate.
For example, pressing 2will show the
entries starting with A. Pressing 2again
will show the entries starting with B, etc.
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
When the phone rings, press ton the
handset, or press l on the base.
•
The call is established.
8.1.6 Call from the phonebook
while already on the phone
Note
•
Incoming call has priority over other
events. Whenever there is an
incoming call, other status in progress
such as phone setting, menu
navigation, etc will be aborted.
Tip
1
While on the phone, press o
Option and then oSelect to
enter the phonebook name list.
Scroll nto a phonebook entry.
Press oSelect.
2
3
•
The call is initiated.
You can mute the ring tone of an
incoming call before answering by
pressing c Silent.
8.1.7 Call using Direct Access
Memory
Press a number key 3to 9for more
than 2 seconds to dial a stored direct
access memory number.
Note
8.2.1 Handsfree answering with
handset
Danger
Handsfree activation can suddenly
increase the volume in the earpiece to a
very high level. Make sure the handset is
not too close to your ear.
When the phone rings, press lon the
handset.
•
The handset(s) and base station each
have their own direct access
memories.
•
how to store, edit, and delete direct
access memory numbers.
•
The loudspeaker is activated on the
handset.
8.1.8 Enter a Dialing Pause
Long press #to enter a pause in the
dialling sequence. The pause is indicated
by a P.
8.3
End a call
The end a conversation, press hon
the handset or l on the base.
•
The call ends.
Using your phone
34
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
information about the number
dialed.
Tip
When auto hang-up is on, you can simply
place the handset back to its base station
or charger to end the call. This feature is
activated by default.
3
Press oNext to display further
information. Afterward, you can
press oPrev. to return to the
former screen. After viewing, press
cBack to return to previous
menu levels.
Note
The call duration (MM:SS) will be
displayed on the handset screen for
about 5 seconds.
8.4.3 Save a redial number into the
phonebook
8.4
Using the Redial list
The redial list stores the last 10 numbers
dialed. A maximum of 32 digits can be
displayed for each entry.
1
2
3
4
Press rin idle mode, scroll nto
select an entry and press o
Menu.
View is highlighted on the screen.
Scroll nto Save Number and
press oSelect.
Enter Name is displayed. Enter
the name of the contact (maximum
14 characters) and press oOK.
Enter Number is displayed and
the selected number from the redial
list appears in the number field. At
this time you can edit the number if
you wish to.
8.4.1 Access Redial list
1
Press rto go to the redial list and
scroll nto browse the redial list.
•
The last number dialed will
appear first in the redial list. If
the redial number matches a
phonebook entry, the name will
be displayed instead.
2
To open the redial list options, press
oMenu.
Note
5
Press oOK. The screen returns
to the redial list.
Press cBack to return to the
Note
previous menu.
Press cClear to delete the last digit
or character entered. Long press c
Clear to clear the entire entry.
8.4.2 View redial number details
1
Press rin idle mode, scroll nto
select an entry and press o
Menu.
8.4.4 Delete a redial number
1
Press rin idle mode, scroll nto
select an entry and press o
Menu.
2
View is highlighted on the screen;
press oSelect to display
Using your phone
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
35
2
Scroll nto Delete and press o
Select.
3
4
Delete? is displayed on the screen.
Press oOK to confirm deletion.
•
A validation tone is emitted.
Note
Press cBack to discard the deletion.
The screen returns to the redial list.
8.4.5 Delete all redial numbers
1
2
3
4
Press rin idle mode, and press
oMenu.
Scroll nto Delete All and press
oSelect.
Delete All? is displayed on the
screen.
Press oOK to confirm deletion.
•
A validation tone is emitted.
Using your phone
36
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
Keys
6
7
8
9
Assigned characters
m n o 6 ñ ó ô õ ö ò
p q r s 7 ß ş Π Θ Σ
t u v 8 ù ú ü μ
9
Use more of your
phone
w x y z 9 ø Ω Ξ Ψ
Tip
9.1
Switch the handset off/on
•
Press cClear to delete the last
digit or character entered or long
press to delete all.
Short press #to shift between
lowercase and uppercase.
To switch the handset off, press and hold
hin idle mode for at least 5 seconds.
To switch it on, press and hold hfor at
least one second.
•
•
Long press #to insert a pause.
9.2
Press and hold *for 3 seconds to lock/ 9.4
unlock the keypad in idle mode.
Handset keypad lock/unlock
Call waiting
If you have subscribed to Call Waiting
services, the earpiece will emit a beep
tone to inform you that there is a second
incoming call. The number or name of
the second caller will also be displayed if
you have subscribed to Caller Line
Identification service (CLI). Please
contact your network provider for more
information on this service.
9.3
Text or number entry
When you select a field in which you can
enter text, you can enter the letters that
are printed on the keys by pressing the
relevant key once or several times. For
example, to enter the name “PAUL”:
1
2
3
4
Press 7once: P
Press 2once: PA
Press 8twice: PAU
Press 5three times: PAUL
To hold the call in progress and answer
the new call:
•
From the handset, press oAccept
or t.
The table below gives you the character
assignment during text or number entry:
•
From the base station, press t.
Keys
0
Assigned characters
. 0 , / : ; “ ‘ ! ¡ ? ¿ * + - % \ ^
~ |
9.5
Call in progress
Some options are available to you during
a call. The available options are :
SPACE 1 @ _ # = < > ( ) &
€ £ $ ¥ [ ] { } ¤ § ...
a b c 2 à â æ á ã ä å ç
d e f 3 è é ê ë Δ Φ
g h i 4 ğ í ì ï ı Γ
1
2
3
4
5
j k l 5 Λ
Use more of your phone
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
37
9.5.1 Adjust earpiece or speaker
volume
1
2
During a call, press lon the
handset to activate the loudspeaker
mode.
Press lagain to return to
deactivate the loudspeaker mode.
9.5.1.1 Earpiece or Speaker
volume in handset
During a call, press uand dto
select the volume level.
9.6
Chain dialing
•
The earpiece/speaker volume will be
displayed as volume bar (level 1 to 5).
The selected volume is saved for the
next call.
This feature allows you to dial an
extension to a number already saved in
the phonebook during a call.
1
Press tor lon the handset, or
press l on the base to take the
line. Then, press oOption and
then oSelect to enter the
phonebook list.
9.5.1.2 Speaker volume in base
During a call, press + and - to
select the volume level.
2
3
Scroll nto a phonebook entry.
Press oSelect.
•
The speaker volume will be displayed
as volume bar (level 1 to 5). The
selected volume is saved for the next
call.
•
The first part is dialed.
4
Enter the extension.
9.7
Using the Intercom
9.5.2 Mute/Unmute microphone
When the microphone is muted, your
correspondent cannot hear you.
The intercom feature allows you to make
free internal calls, transfer external calls
from one unit to another and use the
conference option.
1
During a call, press sto turn off
the microphone.
2
Press sagain to turn on the
microphone.
9.7.1 Intercom another unit
Note
If the handset does not belong to this
model’s series, this function may not be
available.
9.5.3 Activate/Deactivate handset
loudspeaker mode
Danger
1
Press iin idle mode.
Handsfree activation can suddenly
increase the volume in the earpiece to a
very high level. Make sure the handset is
not too close to your ear.
•
Intercom between the base and
the handset is established
immediately if there is only one
handset registered to the base.
Use more of your phone
38
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
2
3
If there is more than 1 registered
handset, scroll nto select the unit
to call and press oSelect.
•
The external call is transferred.
Note
If there is no answer from the called unit,
press ito resume the external call.
•
Once the intercom call is
initiated the
icon is displayed
on the handset.
Press t to answer an intercom
call on the called handset, or l to
answer on the base.
9.7.3 Answer an external call
during intercom
1
During intercom, a new call tone is
emitted when there is an incoming
external call.
•
The intercom is established.
Note
Pressing hon any handset or l on
the base will exit intercom mode and
return other units to idle mode. If an
external call arrives during intercom
mode and you want to accept this call,
you must first exit intercom mode.
2
3
Press h(l on the base) to exit
intercom mode.
Press t(l on the base) to pick
up the external call.
9.7.4 Switch between an internal
and external call
9.7.2 Transfer an external call to
another unit
During the call, press i to switch
between an internal or external call.
1
During the call, press ito put the
external call on hold (the caller can
no longer hear you).
9.7.5 Establish a three-party
conference call
•
The display shows the numbers
of the handsets registered to the
base and the base as well if you
are looking at the display on a
handset.
The conference call feature allows one
external call to be shared with two
handsets or one handset and the base (in
intercom). The three parties can share
the conversation and no network
subscription is required.
2
3
Scroll nto the unit you wish to
transfer your external call to and
press oSelect.
Press t on the called unit to
answer the internal call, where both
internal callers can talk.
1
During the call, press ito put the
external call on hold (the caller can
no longer hear you).
•
The display shows the numbers
of available units (base or
handsets).
•
Intercom is established.
4
Press hon the first unit to
transfer the external call to the
called handset.
Use more of your phone
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
39
2
3
Scroll nto the number of the unit
you wish to establish the conference
call with and press oSelect.
Press t on the called handset or
l on the base to answer the
internal call, where both internal
callers can talk.
The procedures in this section refer you
to the Clock & Alarm menu. However
if you access this menu from the base
station, the menu name is “Clock”.
9.9.1 Set Date and Time
•
Intercom is established.
1
Press min idle mode, scroll nto
Clock & Alarm (Clock on the
base), and press oSelect.
Set Date/Time is highlighted.
Press oSelect.
The last stored date and time are
displayed. Enter the current time
and current date (HH:MM DD/MM/
YY). Press uto move the cursor
left, or press dto move it right.
If using the 12 hour format, just
after setting the minutes, use *
to switch between AM and PM.
Press oOK.
4
Press cConf. or long press i
on the first unit to start the three-
party conference.
2
3
•
Conference will be displayed on
the screen once the conference
call is established.
9.8
Locate Handset
This feature enables you to locate a
missing handset if the handset is in range
and contains charged batteries.
1
Press aon the base station.
4
•
•
All the registered handsets start
to ring.
Once a handset is found, press
cSilent on a handset to stop
its ringing.
•
A validation tone is emitted and
the screen returns to the idle
mode.
Note
You can change the format as shown in
the next section.
2
Press aagain to end the paging.
Note
If there are no key presses within 30
seconds, the handset and base station
will automatically return to idle mode.
9.9.2 Set Time and Date Format
9.9.2.1 Set Time Format
9.9
Clock and Alarm settings
1
Press min idle mode, scroll nto
Clock & Alarm (Clock on the
base), and press oSelect.
Scroll nto Set Format and press
oSelect.
This feature allows you to set the date,
time and alarm settings for your phone.
Note
The alarm feature is available only on the
handset.
2
Use more of your phone
40
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
3
4
Time Format is highlighted in the
display. Press oSelect, then
scroll nto select 12Hours or
24Hours.
Press oSelect to select the
option.
and PM by pressing
OK to confirm.
*.) Press o
•
A validation tone is emitted and
the screen returns to the Alarm
menu. And the alarm icon
displayed.
is
•
A validation tone is emitted and
the screen returns to the Set
Format menu.
•
If you select Off, a validation
tone is emitted and the screen
returns to the Clock & Alarm
menu.
Note
9.9.2.2 Set Date Format
The alarm tone and alarm icon will
sound/blink for 1 minute when the alarm
time is reached. To mute the alarm tone,
simply press any key on the handset.
1
Press min idle mode, scroll nto
Clock & Alarm (Clock on the
base), and press oSelect.
Scroll nto Set Format and press
oSelect.
2
3
4
Scroll nto Date Format and
press oSelect.
9.9.4 Set Alarm Tone (Handset
only)
Scroll nto select DD/MM or
MM/DD and press oSelect to
select the option.
1
Press
m
in idle mode, scroll
nto
Clock & Alarm, and press
o
Select.
•
A validation tone is emitted and
the screen returns to the Set
Format menu.
2
3
Scroll
Select.
Scroll to select the tone. (Three
tones are available. The tones sound
as you scroll.) Press Select to
confirm your selection.
n
to Alarm Tone and press
o
n
o
9.9.3 Set Alarm (Handset only)
1
Press
Clock & Alarm, and press
Select
Scroll
Select.
Scroll
Daily and press
If you select On Once or On
Daily, enter the time (HH-MM) for
the alarm. (If using the 12 hour
format, you can switch between AM
m
in idle mode, scroll
n
to
•
A validation tone is emitted and
the screen returns to the Clock
& Alarm menu.
o
.
2
3
4
n
to Alarm and press
o
n
to Off, On Once, or On
Select.
o
Use more of your phone
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
41
Tip
10 Using your
Phonebook
You cannot store a new phonebook
entry when the memory is full. In this
case, you have to delete existing entries
to make space for new entries.
Your phone can store up to 200
phonebook entries. Each phonebook
entry can have a maximum of 24 digits
for the phone number and 14 characters
for the name.
All names and numbers in the
phonebook must be unique.
Note
10.2 Access phonebook
1
Press din idle mode and scroll
nto browse the phonebook. (You
can also access the phonebook
through the menu mode. m➝
Phonebook ➝ List)
•
The phonebook entries will be
listed in alphabetical order.
Only one unit (handset or base station)
can access the phonebook at a time.
2
To view the details, press o
View.
Tip
10.1 Store a contact in the
phonebook
Instead of scrolling nto browse the
phonebook entries, you can press the
numeric key corresponding to the first
letter of the entry you wish to locate.
For example, pressing 2will show the
entries starting with A. Pressing 2again
will show the entries starting with B, etc.
1
Press min idle mode.
Phonebook is highlighted. Press
o Select.
2
3
New Entry is highlighted. Press
o Select.
Enter Name is displayed. Enter
the name of the contact (maximum
14 characters) and press oOK.
Enter Number is displayed. Enter
the number (maximum 24 digits)
and press oOK.
3
Press t(or l on the base
station) to dial the number. To
return to idle mode press h(or
l on the base station).
4
•
A validation tone is emitted.
10.3 Modify a phonebook entry
Note
1
Press min idle mode.
Phonebook is highlighted. Press
o Select.
Scroll nto Edit Entry and press
oSelect.
•
•
Press cClear to delete the last
digit or character entered or long
press to delete all.
To return to the previous menu, press
cBack.
2
3
Scroll nto select an entry to edit.
Using your Phonebook
42
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
4
5
6
7
Press oSelect to display the
name.
Press cClear to erase the
letters one by one.
Edit the name and press oOK to
confirm.
Edit the number and press oOK
to confirm.
melodies play as you scroll through
them.)
Press oSelect to select the
melody you prefer.
6
•
A validation tone is emitted and
the screen returns to the
Phonebook menu.
Note
•
A validation tone is emitted.
When first ring detection is set On, a
normal tone sounds first, then it changes
to the personalized phonebook melody.
When it is set Off, the personalized
phonebook melody plays from the start.
ring detection On or Off.
Note
While editing, press cClear to delete
the last digit or character entered or
long press to delete all.
10.4 Select phonebook melody
(Handset only)
With this function you can personalize
the melody played when someone in the
phonebook calls you.
10.5 Delete a phonebook entry
1
Press min idle mode.
Phonebook is highlighted. Press
o Select.
Note
You need to subscribe to Caller Line
Identification service to be able to
benefit from this feature.
2
3
4
Scroll nto Delete and press o
Select.
Scroll nto select an entry to
delete and press oSelect.
Delete? is displayed on the screen.
Press oOK to confirm deletion.
1
Press min idle mode.
Phonebook is highlighted. Press
o Select.
2
3
Scroll nto Select Melody and
press oSelect.
Scroll nto the entry you want to
select a melody for, then press o
View.
•
A validation tone is emitted.
Note
Press cBack to discard the deletion.
The screen returns to the phonebook
list.
4
5
The screen shows the melody
currently selected for that entry.
Press oChange to change the
melody.
Scroll nthe list of melodies.
(There are 15 melodies plus No
Melody to choose from. The
10.6 Delete all phonebook entries
1
Press min idle mode.
Phonebook is highlighted. Press
o Select.
Using your Phonebook
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
43
2
3
Scroll nto Delete All and press
oSelect.
Delete All? is displayed on the
screen. Press oOK to confirm
deletion.
location will be displayed. If no
number is stored, No number
will be displayed.
Press oMenu. Edit is
highlighted; press oSelect.
The Phonebook list will be displayed.
4
5
•
A validation tone is emitted.
Scroll
n
to the Phonebook entry
you wish to store in the selected
direct access memory number and
10.7 Direct Access Memory
There are 7 direct access memories
(corresponding to keys 3to 9)
included in the phonebook. A long press
on any of these keys in idle mode will
automatically dial the phone number
stored in the corresponding direct access
memory.
press
o
Select.
6
Press oOK to confirm.
•
A validation tone is emitted and
the screen returns to the
previous menu.
Note
The base station and handset(s) have
their own direct access memories.
Note
Key 1and key 2are reserved for use
with Voicemail 1 and Voicemail 2 in the
network services menu. If you subscribe
to these services, this allows you to dial
your voice mail access numbers using key
1or key 2.
10.7.2 Delete Direct Access
Memory
1
Press min idle mode.
Phonebook is highlighted. Press
o Select.
2
3
Scroll nto Direct Memory and
press oSelect.
10.7.1 Add/Edit Direct Access
Memory
Handset: Scroll nto the key you
wish to delete the memory from.
Base: Scroll u or d to the key
you wish to delete the memory
from and press c Select.
Press oMenu, and then scroll n
to Delete and press oSelect.
1
Press min idle mode.
Phonebook is highlighted. Press
o Select.
2
3
Scroll nto Direct Memory and
press oSelect.
4
Handset: Scroll nto the key you
wish to edit (Key 3 to Key 9).
Base: Scroll u or d to the key
you wish to edit (Key 3 to Key 9)
and press c Select.
•
A validation tone is emitted and
the screen returns to the
previous menu.
•
The current number stored in
the direct access memory
Using your Phonebook
44
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
2
To view the call details, press o
Menu and then press oSelect.
The display shows the caller
information.
11 Using the Call log
The call log stores the last 50 external
calls and any new voice mail received. In
idle mode, New Call appears on the
handset or base display for new and
unanswered calls. If you have subscribed
to Caller Line Identification (CLI), and
provided the identity of the caller is not
withheld, the name (or number) of the
caller will be displayed.
•
Press cBack at any time to
return to the previous menu.
11.1.1 To choose the format for call
log display
You must choose the correct format to
dial the area code and number of the call
log record chosen. The original incoming
number from the call log will appear as a
7, 10 or 11-digit number. If it is a long
distance call, the prefix digit 1 will
automatically appear in front of the 10-
digit local calls.
During CLI display, you can press *to
toggle area code and long distance code
display on/off.
Note
If the identity of the caller is withheld,
External Call is displayed in the call log
along with the date and time of the call. If
you have not subscribed to Caller Line
Identification service, there will not be
any caller information displayed in the call
log.
1
When viewing the call log, press *
to change the format of the call log
display as it should be dialed from
your location. For example, if the
call log entry appears as “234-567-
8900”:
•
•
•
•
Press *once to display “1-234-
567-8900”
Press *twice to display “567-
8900”
Press *3 times to display “1-
567-8900”
Press *4 times to display
“234-567-8900” again.
11.1 Access the Call log
1
Press uin idle mode, and scroll
nto browse the call log.
•
The calls (missed and received)
are displayed in chronological
order with the most recent call
at the top of the list. If the call is
unviewed and unanswered, New
appears on the display. After you
view the message, New
2
To dial the current displayed
number, press t(or l on the
base station).
•
The call is initiated.
disappears.
Note
•
Press tto dial out the number
of the selected call log entry.
You need to subscribe to Caller Line
Identification service to be able to see
Using the Call log
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
45
the caller’s number or name in the call
log (see section 11.1 - “Access the Call
When you store an incoming number in
the phonebook, the digits of the number
will be saved exactly as they appear on
the screen.
Note
Press cClear to delete the last digit
or character entered or long press to
delete all.
11.3 Delete a call list entry
If the first 3 digits of the incoming
number corresponds to the local area
code set in your phone, they will be
filtered automatically when you press the
tor lon the handset (or l on
the base station) to dial. To change the
1
Press u in idle mode, then scroll
n to select an entry and press o
Menu.
Scroll nto Delete and press o
Select.
2
3
Delete? is displayed on the screen.
Press oOK to confirm deletion.
•
A validation tone is emitted, the
call list entry is deleted, and the
display goes to the next entry in
the call list.
11.2 Save call list entry into the
phonebook
Note
1
Press uin idle mode, then scroll
n to select an entry and press o
Menu.
Press cBack to discard the deletion.
The screen returns to the Call List
menu.
2
3
Scroll nto Save Number and
press oSelect.
Enter Name is displayed on the
screen. Enter the name of the
contact (maximum 14 characters)
and press oOK.
Enter Number is displayed and
the selected number from the call
list appears in the number field. At
this time you can edit the number if
you wish to.
11.4 Delete all call list entries
1
2
3
Press u in idle mode, then press
oMenu.
Scroll nto Delete All and press
oSelect.
Delete All? is displayed on the
screen. Press oOK to confirm
deletion.
4
5
•
A validation tone is emitted. The
display shows List Empty for 2
seconds and returns to the idle
mode.
Press oOK.
•
A confirmation tone sounds and
the screen returns to call log.
Using the Call log
46
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
plus progressive and off. The base station
has 5 ringer volume levels plus off. The
default setting for both handsets and the
base station is level 3.
12 Personal settings
12.1 Change the Handset Name
(Handset only)
You can name the handset and display the
handset name in idle mode. The default
handset name of your handset is Philips.
To adjust ring volume on the
handset:
1
2
3
4
Press min idle mode, scroll nto
Personal Set, and press o
Select.
Scroll nto Handset Tones and
press oSelect. Ring Volume is
highlighted. Press oSelect.
Scroll nto your desired volume
level. The ring tone sounds at each
level.
1
Press min idle mode, scroll nto
Personal Set and press o
Select.
2
3
Handset Name is highlighted.
Press oSelect.
The last stored name is displayed.
Press cClear to delete the
characters one by one or a long
press to delete all.
Press oOK to confirm.
•
A validation tone is emitted and
the screen returns to the
Handset Tones menu.
4
Enter the new name and press o
OK to confirm.
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
To adjust ring volume on the base
station:
Press + or - in idle mode.
Note
If ring volume is set to off, the
will be displayed on the screen.
If ring volume is set to progressive
icon
12.2 Ring Settings
12.2.1 Set the Ring Volume
Danger
(handset only), the ringer will start at level
1 and go up one level volume every ring.
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
You can set the ring volume
independently for each registered
handset, as well as the base station.
Handsets have 5 ringer volume levels,
12.2.2 Set the Ring Tones
There are 15 ring tones available on your
handset, and 5 ring tones available for the
base.
1
Press min idle mode, scroll nto
Personal Set, and press o
Select.
Personal settings
47
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
2
Scroll nto Handset Tones on
the handset or Base Tones on the
base and press oSelect. Then
scroll nto Ring Tones and press
oSelect.
Scroll nto your desired melody.
The melodies will play as you scroll
them.
1
Press min idle mode, scroll nto
Personal Set, and press o
Select.
Scroll nto Langue and press
oSelect.
2
3
3
4
Scroll nto your desired language
and press oSelect to confirm.
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
Press oSelect to set the ring
tone.
•
A validation tone is emitted and
the screen returns to the
previous menu.
Note
Once the display language is set, the
option menus on the unit will
immediately switch to display in the
selected language.
12.2.3 Activate/Deactivate Key
Beep
A single beep tone is emitted when a key
is pressed. You can enable or disable the
key beep.
12.4 Select the Display Wallpaper
(Handset only)
There are 3 wallpaper images available on
your handset as well as an option to set it
off.
1
Press min idle mode, scroll nto
Personal Set, and press o
Select.
1
Press min idle mode, scroll nto
Personal Set, and press o
Select.
2
Scroll nto Handset Tones on
the handset or to Base Tones on
the base and press oSelect.
Then scroll nto Key Beep and
press oSelect.
2
3
Scroll nto Wallpaper and press
oSelect.
Scroll nto your desired wallpaper.
The image on the display will change
as you scroll.
3
Scroll nto select On or Off and
press oSelect to confirm.
•
A validation tone is emitted and
the screen returns to the
previous menu.
4
Press oSelect to confirm.
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
12.3 Change the Display Langue
Your handset and base can support
different display languages.
Personal settings
48
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
12.5 Select the Color Theme
(Handset only)
12.7 Set the Backlight Time
(Handset only)
There are 4 color themes available on
your handset.
You can change the backlight timing for
the display. There are 3 options available
- 20, 40, or 60 seconds.
1
Press min idle mode, scroll nto
Personal Set, and press o
Select.
1
Press min idle mode, scroll nto
Personal Set, and press o
Select.
2
3
Scroll nto Color Theme and
press oSelect.
Scroll nto your desired color
theme. The color theme used on
the display will change as you scroll.
Press oSelect to confirm.
2
3
Scroll nto Backlight Time and
press oSelect.
Scroll nto the desired backlight
time, and press oSelect to
confirm.
4
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
12.6 Set the Display Contrast
You can change the contrast of the text
on the display. There are 5 contrast levels
available. The default is level 3.
12.8 Deactivate/Activate Auto
Hang-Up (Handset only)
If auto hang-up is set to On, it will
automatically release the line when the
phone is put back on the cradle.
If auto Hang-up is set to Off, putting the
handset back on the cradle while in talk
mode will switch the handset to hands
free talk mode. This allows you to charge
the handset during calls.
1
Press min idle mode, scroll nto
Personal Set, and press o
Select.
2
3
Scroll nto Contrast and press
oSelect.
Scroll nto the desired display
contrast, and press oSelect to
confirm.
The default setting for auto hang up is On.
1
Press min idle mode, scroll nto
Personal Set, and press o
Select.
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
2
3
Scroll nto Auto Hang-up and
press oSelect.
Scroll nto On or Off and press
oSelect to confirm.
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
Personal settings
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
49
Select, edit the new number and
press oOK.
Note
13 Advanced settings
When you switch Easy Call on, Easy
Call On will be displayed on your screen
in standby mode. You can still answer any
incoming call as normal.
These settings can be made from any
registered SE658 handset. They cannot
be made from the base station.
To switch Easy Call off from idle mode,
press cCancel. Mode is highlighted
in the display. Press oSelect again to
select Mode, and then scroll nto Off.
Press oSelect to confirm.
13.1 Easy Call
When activated, this feature allows you
to dial a preset number by pressing any
key on the handset (except c
Cancel). This feature is useful for fast
access to emergency services.
13.1.2 Set Easy Call number
1
2
3
Press min idle mode, scroll nto
Advanced Set and press o
Select.
Easy Call is highlighted in the
display. Press oSelect to enter
the Easy Call menu.
Mode is highlighted in the display.
Scroll nto Number and press
oSelect.
13.1.1 Set Easy Call to On or Off
Follow this procedure to switch Easy Call
on. To switch Easy Call off, see the Note
at the end of this section.
1
Press min idle mode, scroll nto
Advanced Set and press o
Select.
2
3
Easy Call is highlighted. Press o
Select to enter the Easy Call menu.
Mode is highlighted in the display.
Press oSelect again to select
Mode, then scroll nto On.
Press oSelect to confirm the
selection.
4
5
Input the Easy Call number.
Press oOK to confirm.
•
A validation tone is emitted and
the screen returns to the Easy
Call menu.
4
•
If an Easy Call number has not
been set, you will be prompted
to input the Easy Call number.
If an Easy call number has already
been set, the screen returns to
idle mode. If you want to edit the
number, press cCancel and
scroll to Number and press o
13.2 Auto Conference
If activated, this feature allows another
handset to join a conversation with an
external call by simply pressing t. The
default setting is On.
•
1
Press min idle mode, scroll nto
Advanced Set and press o
Select.
Advanced settings
50
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
2
3
Scroll nto Conference and press
oSelect.
Scroll nto select On or Off and
press oSelect to confirm.
5
Scroll nto select On or Off and
press oSelect to confirm.
•
If a Call Barring number has not
been set, you will be prompted
to input a Call Barring number.
•
A validation tone is emitted and
the screen returns to the
Advanced Set menu.
Note
To switch Call Barring mode off again
from idle mode, press cCancel and
enter the PIN number. Mode is
13.3 Call Barring
highlighted in the display. Press o
Select to select Mode, then scroll n
to Off and press oSelect.
If activated, this function prevents dialing
out to numbers beginning with
designated barring numbers. This is
useful for preventing outgoing long
distance calls or calls to specific prefixes.
You can store up to four numbers, each
with up to 4 digits.
13.3.2 Set a Call Barring number
1
Press min idle mode, scroll nto
Advanced Set and press o
Select.
Note
If you switch call barring on, Call Barr
On is displayed on the screen in idle
mode. By default call barring is off.
2
Scroll nto Call Barring and
press oSelect.
Enter the PIN number.
Mode is highlighted in the display.
Scroll dto Number and press
oSelect.
3
4
13.3.1 Set Call Barring Mode
By default, Call Barring is OFF.
5
6
Scroll nto select a call barring
number location, and press o
Select to confirm.
Input the call barring number (up to
4 digits) and press oOK.
1
Press min idle mode, scroll nto
Advanced Set and press o
Select.
2
3
Scroll nto Call Barring and
press oSelect.
Enter the PIN number.
•
A validation tone is emitted and
the screen returns to the Call
Barring menu.
•
If you enter and incorrect PIN
number, an error tone will sound
and “Wrong PIN!” will be
displayed. Then, the display will
return to idle screen.
13.4 XHD Sound
XHD (extra high definition) Sound can
increase voice quality when On. The
default setting is On.
4
Mode is highlighted in the display.
Press oSelect.
To turn it off:
Advanced settings
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
51
1
Press min idle mode, scroll nto
Advanced Set and press o
Select.
Scroll nto XHD Sound and
press oSelect.
prompted to enter the current
PIN again.
4
5
New PIN: will be displayed. Enter
the new PIN and press oOK.
Confirm PIN: will be displayed.
Enter the new PIN again and press
oOK to confirm PIN change.
2
3
Scroll nto select On or Off and
press oSelect to confirm.
•
A validation tone is emitted and
the screen returns to the
Advanced Set menu.
•
A validation tone is emitted,
Saved! is displayed and the
screen returns to the Advanced
Set menu.
Tip
13.5 Change PIN
If you forget your PIN, you will need to
reset your phone to its default settings.
For more details, see section 13.8 -
The PIN is used for setting call barring
numbers and registration/unregistration
of handsets. The default PIN number is
0000. This PIN is also used to protect
the settings of your handset. Your
handset will prompt you whenever the
PIN is required.
13.6 Registration
If you wish to register an additional
handset or if you have inadvertently
unregistered your phone’s handset and
want to re-register it, follow the
procedure described below. This is the
procedure for registering SE65 handsets.
Procedures may vary for other types of
handsets. In this case, please refer to the
manufacturer of the handset. Additional
handsets must be registered to the base
station before you can use them. Up to 8
handsets can be registered to one base
station.The PIN is required before you
can register or unregister handsets.
Note
Note
The default PIN code is preset to 0000. If
you change this PIN code, keep the PIN
details in a safe place where you have
easy access to them. Do not lose the PIN
code.
1
Press min idle mode, scroll nto
Advanced Set and press o
Select.
2
3
Scroll nto Change PIN and
press oSelect.
Old PIN: will be displayed. Enter
the current PIN and press oOK.
•
The PIN entered will be shown
as asterisks (*) on the screen.
If you enter an incorrect PIN
number, an error tone will sound
and “Wrong PIN!” will be
By default, the PIN is 0000.
•
displayed. Then, you will be
Advanced settings
52
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
13.6.1 Easy registration
assigned by the base
automatically.
1
Insert the unregistered handset in
the base station to automatically
begin registration.
2
Registering… is displayed on the
screen.
13.7 Unregister
1
Press
Advanced Set and press
Select
Scroll
Select.
Enter the PIN when prompted and
m
in idle mode, scroll
n
o
to
•
Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
assigned by the base
.
2
3
4
n
to Unregister and press
o
automatically.
Note
press
Scroll
o
n
OK to confirm.
to select the handset
The easy registration is possible only
when PIN has not been changed and is
still the default PIN 0000.
number to unregister and press
Select. Press OK to confirm.
A validation tone is emitted to
indicate successful unregistration.
Note
o
o
•
13.6.2 Manual registration
1
On the base station, press and hold
afor 3 seconds. A beep sounds to
indicate that the base is ready to
accept registration.
You can only use a SE658 handset to
unregister a handset that does not
belong to the SE658 range.
Note
If no action is taken on the handset
within 90 seconds, the registration
procedure will be aborted. If this
happens, repeat from Step 1.
13.8 Reset Unit
You can reset your phone to its default
settings with this feature. (see 13.14
2
On the handset, press
to Advanced Set and press
Select
Scroll
Select
Enter the PIN when prompted and
press OK to confirm.
m
, scroll
o
n
Caution
Upon reset, all your personal settings,
call log and redial list entries will be
deleted and the phone will return to its
default settings. However, your
phonebook will remain unchanged after
reset.
.
3
4
n
.
to Register and press
o
o
Registering… is displayed on the
Note
screen.
You may have to configure your phone
once again.
•
Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
Advanced settings
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
53
1
Press min idle mode, scroll nto
Advanced Set and press
Select
Scroll nto Reset and press
Select
Reset? is displayed on the screen.
Press OK to confirm.
1
Press min idle mode, scroll nto
Advanced Set and press o
Select.
Scroll nto Area Code and press
oSelect.
Area Code will appear in the
display. Input your area code and
press oOK to confirm.
o
.
2
3
o
2
3
.
o
•
•
A validation tone is emitted.
The unit is reset to its default
settings. (See section 13.14
below.)
•
A validation tone is emitted and
the screen returns to the
Advanced Set menu.
13.9 Set Area Code
13.10 Set Auto Prefix
This feature is useful when you have
subscribed to Caller Line Identification
service. It allows you to set an area code
in your phone. Once the local area code
is set, the phone automatically filters the
area code for all incoming calls, by
removing the area code for local calls and
retaining the area code for calls from
other areas.
If it is a local call, then only the phone
number of the caller is displayed during
an incoming call or when you call the
number from the call log. If it is a long
distance call, then both the area code and
phone number will be displayed in a
proper format to be dialed out directly
from the call log, or saved into the
phonebook.
This feature allows you to define a prefix
number to be added to the beginning of a
number during predialling (see
also use this feature to add a detect
string to match and replace the first few
digits of the number during predialing.
You can enter up to a maximum of 5
digits for the detect string and 10 digits
for the auto prefix number.
1
Press min idle mode, scroll nto
Advanced Set and press
Select
Scroll nto Auto Prefix and press
Select
o
.
2
3
o
.
Detect Digit: is displayed on the
screen. Enter a detect string
number (maximum 5 digits) and
Note
press
o
OK to confirm.
You can enter 3 digits for the area code.
You need to subscribe to Caller Line
Identification service to be able to see
the caller’s number or name in the call
details.
4
Prefix: is displayed on the screen.
Enter the prefix number (maximum
10 digits) and press
confirm.
o
OK to
Advanced settings
54
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
•
A validation tone is emitted and
the screen returns to the
Advanced Set menu.
therefore you should not need to change
it.
1
Press min idle mode, scroll nto
Advanced Set, and press
Select
Scroll nto Dial Mode and press
Select
Scroll nto To n e or Pulse and
press Select to confirm.
Note
o
If no detect string (blank) is entered, the
prefix number will be automatically
added to the predial number after tis
pressed.
For numbers starting with *, # or P, the
prefix number will not be added to the
predial number after tis pressed.
.
2
3
o
.
o
•
A validation tone is emitted and
the screen returns to the
Advanced Set menu.
13.11 Change Flash time
Flash time is the time delay by which the
line will be disconnected after you press
the tkey. It can be set to short or
long.
13.13 Set First Ring Detection
First ring detection allows the phone to
ring upon reception of the first ring
signal. It is recommended that you set
first ring detection Off if you subscribe
to caller line identification service.
(When using personalized phonebook
melodies, this will prevent a normal ring
tone from sounding before a melody
starts playing.) If you do not subscribe to
caller line identification service, it is
recommended that you set first ring
The default value is Long.
1
Press min idle mode, scroll nto
Advanced Set, and press o
Select.
2
3
Scroll nto Flash Time and press
oSelect.
Scroll nto Short or Long and
press oSelect to confirm.
•
A validation tone is emitted and
the screen returns to the
Advanced Set menu.
1
Press min idle mode, scroll nto
Advanced Set, and press
Select
Scroll nto First Ring and press
Select
Scroll nto On or Off and press
Select to confirm.
o
Note
.
The use of your SE658 cannot be
guaranteed on all PABX.
2
3
o
.
o
13.12 Change the Dial Mode
•
A validation tone is emitted and
the screen returns to the
Advanced Set menu.
The default value for dial mode that is
preset in your handset should be the best
suited for your subscribed network and
Advanced settings
55
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
Note
Parameter Default Value
The default setting for first ring detection
is On. The setting automatically switches
to Off when you receive a call containing
caller line identification. However, this
occurs only if you do not first manually
change the setting. (It does not change
automatically if you manually change the
first ring setting even once.)
Flash Time
PIN Code
Call Barring Off
Call Barring Cleared
Number
Long
0000
XHD Sound On
Easy Call
Easy Call
Number
Off
Cleared
Auto Prefix Cleared
Set First Ring On
13.14 Default Settings
Phonebook
Memory
After a reset,
phonebook is
Parameter Default Value
Ring Volume Level 3
maintained as it was just
before the reset
Cleared
Ring Tone
Earpiece
Volume
Speaker
Volume
Key Beep
Display
Langue
Wallpaper
Color
Ring 1
Level 3
Redial
Memory
Level 3
CLI Memory Cleared
Network
Service
Auto
Empty (no preset
numbers)
On
On
FR
Conference
Wallpaper 1
Color 1
Theme
Display
Level 3
Contrast
Backlight
Time
14 Network Service
20 Seconds
Auto Hang- On
Up
The network service functions provide a
convenient way for you to access some
network provider services. Subscriptions
are required in order to benefit from
these services. Contact your network
provider for details. Depending on your
subscribed network, some of the
Handset
Name
Philips
Time/Date
Format
MM/DD 12Hours
Time/Date
Set Alarm
00:00 01/01/2008
Off
services and menus described in this
Alarm Tone Bell 2
Dial Mode Tone
Network Service
56
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
chapter may not be available in your
SE658.
14.1.1 Change Call Forward
Activation Codes
These settings can be made from any
registered SE658 handset. They cannot
be made from the base station.
Note
The Call Forward, Call Forward
when Busy, and Call Forward when
Unanswered functions require
activation codes (prefix and suffix) and a
deactivation code. You must get these
codes from your service provider.
There are two parts to the Call Forward
activation code - a prefix and a suffix.
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
2
3
4
5
Scroll nto Call Forward and
press oSelect.
Scroll nto Change Code and
press oSelect.
Scroll nto Activation and press
oSelect.
You are now at the Activation
screen. Scroll nto Prefix or
Suffix, then press o Select.
You will be prompted to enter the
prefix/suffix code. Enter the number
(maximum 14 digits) and press o
OK.
14.1 Call Forward
You can use Call Forward to forward
incoming calls to another number. This
can be useful if you want calls to go to
another number overnight or when
traveling. You can activate or deactivate
Call Forward as follows:
6
•
A confirmation tone will sound
and the display will return to the
Activation screen.
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
Note
2
3
Scroll nto Call Forward and
press oSelect.
Press cClear to delete entered
numbers. Long press cClear to clear
the entire entry.
To activate Call Forward, scroll
nto Activate and press o
Select. To deactivate Call
Forward, scroll to Deactivate
and press oSelect.
7
Repeat from step 5 until you are
finished inputting both the prefix
and suffix codes.
4
5
If you selected Activate, you will
be prompted to enter the number
for call forward. Enter the number
(maximum 24 digits) and press o
OK.
The Call forward codes and the
number are dialed. Press hand
return to idle mode.
14.1.2 Change Call Forward
Deactivation Code
You must get the deactivation code from
your service provider.
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
Network Service
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
57
2
3
4
5
Scroll nto Call Forward and
press oSelect.
Scroll nto Change Code and
press oSelect.
Scroll nto Deactivation and
press oSelect.
Enter the deactivation code
(maximum 14 digits) and press o
OK.
5
The Call forward when busy codes
and the number are dialed. Press
hand return to idle mode.
14.2.1 Change Call Forward when
Busy Activation Codes
There are two parts to the Call Forward
when Busy activation code - a prefix and
a suffix.
•
A confirmation tone will sound
and the display will return to the
Call Forward screen.
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
Note
Press cClear to delete entered
numbers. Long press cClear to clear
the entire entry.
2
3
4
5
Scroll nto Call Fwd Busy and
press oSelect.
Scroll nto Change Code and
press oSelect.
Scroll nto Activation and press
oSelect.
You are now at the Activation
screen. Scroll nto Prefix or
Suffix, then press o Select.
You will be prompted to enter the
prefix/suffix code. Enter the number
(maximum 14 digits) and press o
OK.
14.2 Call Forward when Busy
This function will forward incoming calls
to another number if the line is busy. You
can activate or deactivate Call Forward
when Busy as follows:
6
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
2
3
Scroll nto Call Fwd Busy and
press oSelect.
•
A confirmation tone will sound
and the display will return to the
Activation screen.
To activate Call Fwd Busy, scroll
nto Activate and press o
Select. To deactivate Call Fwd
Busy, scroll to Deactivate and
press oSelect.
Note
Press cClear to delete entered
numbers. Long press cClear to clear
the entire entry.
4
If you selected Activate, you will
be prompted to enter the number
for call forward when busy. Enter
the number (maximum 24 digits)
and press oOK.
7
Repeat from step 5 until you are
finished inputting both the prefix
and suffix codes.
Network Service
58
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
14.2.2 Change Call Forward when
Busy Deactivation Code
4
5
If you selected Activate, you will
be prompted to enter the number
for call forward when unanswered.
Enter the number (maximum 24
digits) and press oOK.
The Call forward when unanswered
codes and the number are dialed.
Press hand return to idle mode.
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
2
3
4
5
Scroll nto Call Fwd Busy and
press oSelect.
Scroll nto Change Code and
press oSelect.
Scroll nto Deactivation and
press oSelect.
Enter the deactivation code
(maximum 14 digits) and press o
OK.
14.3.1 Change Call Forward when
Unanswered Activation
Codes
There are two parts to the Call Forward
when Unanswered activation code - a
prefix and a suffix.
•
A confirmation tone will sound
and the display will return to the
Call Fwd Busy screen.
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
Scroll nto Call Fwd Unans and
press oSelect.
Scroll nto Change Code and
press oSelect.
Scroll nto Activation and press
oSelect.
You are now at the Activation
screen. Scroll nto Prefix or
Suffix, then press o Select.
You will be prompted to enter the
prefix/suffix code. Enter the number
(maximum 14 digits) and press o
OK.
Note
Press cClear to delete entered
numbers. Long press cClear to clear
the entire entry.
2
3
4
5
14.3 Call Forward when
Unanswered
This function will forward unanswered
calls to another number. You can activate
or deactivate Call Forward when
Unanswered as follows:
6
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
2
3
Scroll nto Call Fwd Unans and
press oSelect.
•
A confirmation tone will sound
and the display will return to the
Activation screen.
To activate Call Fwd Unans, scroll
nto Activate and press o
Select. To deactivate Call Fwd
Unans, scroll to Deactivate and
press oSelect.
Note
Press cClear to delete entered
numbers. Long press cClear to clear
the entire entry.
Network Service
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
59
7
Repeat from step 5 until you are
finished inputting both the prefix
and suffix codes.
2
3
Scroll nto Voicemail and press
oSelect.
You are now at the Voicemail
menu and Call is highlighted. Press
oSelect to connect to the voice
mail account number.
14.3.2 Change Call Forward when
Unanswered Deactivation
Code
Note
You can also access your voice mail
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
number by long-pressing 1.
2
3
4
5
Scroll nto Call Fwd Unans and
press oSelect.
Scroll nto Change Code and
press oSelect.
Scroll nto Deactivation and
press oSelect.
Enter the deactivation code
(maximum 14 digits) and press o
OK.
14.4.2 Set Voice Mail Number
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
2
3
4
Scroll nto Voicemail and press
oSelect.
Scroll nto Settings and press
oSelect.
Enter the voice mail account
number (maximum 14 digits) and
press oOK.
•
A confirmation tone will sound
and the display will return to the
Call Fwd Unans screen.
•
A confirmation tone will sound
and the display will return to the
Voicemail screen.
Note
Press cClear to delete entered
numbers. Long press cClear to clear
the entire entry.
14.5 Voice Mail 2
Use this function to access an alternate
voice mail account. Access and setting
procedure is same as for Voice Mail.
Note
14.4 Voice Mail
Use this function to access your voice
mail account.
You can also access your voice mail
number by long-pressing 2.
14.4.1 Access Voice Mail
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
14.6 Information Service
Use this function to access your
information service account.
Network Service
60
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
14.6.1 Access Info Service
14.8.1 Access the Call Return
Service
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
2
3
Scroll nto Info and press o
Select.
2
3
Scroll nto Call Return and press
oSelect.
You are now at the Call Return
menu and Call is highlighted. Press
oSelect to connect to the call
return account number.
You are now at the Info menu and
Call is highlighted. Press o
Select to connect to the
information service account
number.
14.6.2 Set Info Service Number
14.8.2 Set Call Return Service
Number
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
2
3
4
Scroll nto Info and press o
Select.
Scroll nto Settings and press
oSelect.
Enter the information service
account number (maximum 14
digits) and press oOK.
2
3
4
Scroll nto Call Return and press
oSelect.
Scroll nto Settings and press
oSelect.
Enter the call return service number
(maximum 14 digits) and press o
OK.
•
A confirmation tone will sound
and the display will return to the
Info screen.
•
A confirmation tone will sound
and the display will return to the
Call Return screen.
14.7 Information Service 2
Use this function to access a second
information service account. Access and
setting procedure is same as for Info
Service.
14.9 Cancel Call Back
When calling a busy line, some operators
prompt you to press a key to activate a
call back option. By activating the call
back option, you will receive a call from
the network as soon as your
14.8 Call Return
This function allows you to get
information on who called you last.
correspondent’s line is free. When
responding to this call, the network will
automatically connect you to that
Network Service
61
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
correspondent. Your answering machine
will not answer to this call and your call
log will not record this call either. The
Cancel call back feature enables you to
deactivate the call back feature when you
have activated it.
14.10 Withhold ID
Use this function to make a call without
sending your ID.
14.10.1 Activating Withhold ID
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
14.9.1 Call the Cancel Call Back
Number
2
3
Scroll nto Withhold ID and
press oSelect.
You are now at the Withhold ID
menu and Activate is highlighted.
Press oSelect to activate the
withhold ID function.
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
2
3
Scroll nto Cancel Call BK and
press oSelect.
You are now at the Cancel Call
BK menu and Call is highlighted.
Press oSelect to connect to the
Cancel Call Back number.
14.10.2 Set the Withhold ID Code
When withhold ID is active (see above),
this code is appended before the number
you dial to tell the handset to withhold
ID information. Get this code from your
service provider.
14.9.2 Set the Cancel Call Back
Number
Get the cancel call back number from
your service provider.
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
Scroll nto Withhold ID and
press oSelect.
Scroll nto Settings and press
oSelect.
Enter the withhold ID code and
press oOK.
1
Press min idle mode, scroll nto
Netw. Services, and press o
Select.
2
3
4
2
3
4
Scroll nto Cancel Call BK and
press oSelect.
Scroll nto Settings and press
oSelect.
Enter the cancel call back number
(maximum 14 digits) and press o
OK.
•
A confirmation tone will sound
and the display will return to the
Withhold ID screen.
•
A confirmation tone will sound
and the display will return to the
Cancel Call BK screen.
Network Service
62
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
and off via your handset (see section
15.6.2).
15 Telephone
answering machine
15.1 Playing Messages
(TAM)
15.1.1 Playback of messages via
handset (Handset only)
Your phone features an answering
machine that records unanswered calls
when it is activated. The answering
machine can store up to 59 messages.
The maximum recording time is 3
minutes per message, or 30 minutes for
all messages. The maximum length of an
outgoing message is 1 minute. You can
use the control keys on the base station
to perform the basic functions of the
answering machine such as message
playback, deleting messages and
The answering machine message counter
blinks when there are new messages and
display the number of new messages. The
first recorded message is played first via
the loudspeaker. When all new messages
have been played, the answering machine
will stop and the message counter will
stop blinking.
1
Press the mkey in idle mode,
scroll nto Answer Machine, and
press oSelect.
adjustment of volume on the base
station. For a description of each
2
Play is highlighted. Press o
Select to start playing new
messages.
function of the control keys on the base
station, please see “Overview of the base
You can also use the answering machine
menu to access the answering machine
functions. (Functions available differ
depending on whether you are using the
menu on the handset or the base
station.) Those procedures are covered
below. There is also a menu to set the
answering machine options.
The telephone answering machine is ON
by default. To switch the answering
machine between on and off, press e
on your base station. Alternatively, you
may switch the answering machine on
•
The handset displays New and
the number of new messages in
the format 01/04, where 01 is
the number of the message being
played and 04 is the number of
new messages.
•
If there are no new messages, the
handset displays the number of
old messages in the same format
(however ‘New’ is not displayed.)
and plays the old messages.
Telephone answering machine (TAM)
63
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
15.1.2 Functions available during
playback
15.3 Turn the Répondeur
On/Off from the Handset
During playback, you can enable the
following functions by pressing o
Menu. Use nto scroll between the
functions and press oSelect to
confirm.
(Handset only)
You can turn the answering machine on
or off from the handset as follows.
1
Press the mkey in idle mode,
scroll nto Answer Machine, and
press oSelect.
Scroll nto Answer On/Off and
press oSelect.
Scroll nto select On or Off and
press oSelect.
A validation tone is emitted and
the screen returns to Answer
Machine menu.
Repeat
Replay the current
message
2
3
Next
Listen to the next
message.
Previous
Delete
Listen to the previous
message.
Delete the message
currently playing.
•
15.2 Delete all messages (Handset
15.4 Play, Record, or Delete an
Outgoing Message
only)
Warning
Deleted messages cannot be recovered.
Note
You can record a personalized message
to be played when the answering
machine picks up an incoming call.
Note
Unplayed messages will not be deleted.
1
Press the mkey in idle mode,
scroll nto Answer Machine, and
press oSelect.
Scroll nto Delete All and press
oSelect.
Delete All? is displayed on the
screen. Press oOK to confirm
deletion of all your messages.
The maximum length of an outgoing
message is 1 minute.
1
Press the mkey in idle mode,
scroll nto Answer Machine, and
press oSelect.
2
3
2
3
Scroll nto Record OGM and
press oSelect.
Scroll nto select Answer & Rec.
or Answer Only and press o
Select.
•
Waiting… is displayed while the
messages are deleted; then,
Deleted is displayed for 2
seconds, and the display returns
to the Answer Machine menu.
4
Scroll nto select Play, Record
Message, or Delete and press o
Select.
•
If Play is selected, the current
outgoing message is played.
Telephone answering machine (TAM)
64
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
•
•
If Record Message is selected,
a beep sounds and message
recording starts automatically.
If Delete is selected and a
15.6 Answering Machine Settings
15.6.1 Ring Delay
personal outgoing message was
previously recorded, Deleted is
displayed. The predefined OGM
is reinstated automatically.
This is the number of rings before the
answering machine answers and starts
playing your greeting message. You can
set the answering machine to start
playing your greeting message after 3 to 8
rings or the “Economy” option. The
default ring delay is Economy.
15.5 Set the Answer mode
There are 2 answer modes available:
Answer Only and Answer & Record. By
default, the answer mode is Answer &
Record, which lets your caller leave a
message on the answering machine. This
can be changed to Answer Only mode,
which does not allow your caller to leave
any messages on the answering machine.
1
Press the mkey in idle mode,
scroll nto Answer Machine, and
press oSelect.
Scroll nto Settings and press
oSelect.
Ring Delay is highlighted. Press
oSelect, then scroll nto select
from 3 to 8 or Economy.
Press oSelect to confirm.
2
3
1
Press the mkey in idle mode,
scroll nto Answer Machine, and
press oSelect.
4
•
A validation tone is emitted and
the display returns to the
Settings menu.
2
3
Scroll nto Answer Mode and
press oSelect.
Scroll nto select Answer & Rec.
or Answer Only and press o
Select.
Note
If Economy is selected, the ring delay
depends on the answering machine’s
condition.
•
A validation tone is emitted and
the screen returns to Answer
Machine menu.
•
•
•
If there are new messages in the
answering machine, it will pick up the
line after 2 rings.
If there are no new messages in the
answering machine, it will pick up the
line after 4 rings.
Hence, if you want to check if you
have any messages without incurring
call charges, you can hang up the call
after the 3rd ring.
Note
Depending on the answer mode you have
selected, the appropriate default outgoing
message is played once the answering
machine picks up an incoming call.
Tip
You can set the answering machine to
play a personalized outgoing message.
Telephone answering machine (TAM)
65
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
15.6.2 Remote Access
2
Press # key and a voice prompt
invites you to enter your PIN code.
Enter the remote access code (same
as your PIN code).
You can check the messages on your
answering machine by calling in from an
outside line and entering the remote
access code*. The keypad on the phone
you use to dial in acts like the functions
on your answering machine.
•
If the access code is incorrect, a
voice prompt “Security code
error, please enter again” will
sound. Then enter the PIN code
again. If the PIN code is still
incorrect, the answering machine
will drop the line immediately.
If the remote access code is
correct, a short validation tone
will be heard.
Note
This feature is deactivated by default.
* The remote access code (which is the
same as your PIN code) prevents any
unauthorised remote access of your
answering machine.
•
Note
15.6.2.1 Activate/Deactivate
Remote Access
Operation is cancelled if the PIN code is
not entered within 8 seconds.
1
Press the mkey in idle mode,
scroll nto Answer Machine, and
press oSelect.
Scroll nto Settings and press
oSelect. Then, scroll nto
Remote Access and press o
Select.
If the answering machine is off, the phone
will enter into the remote access mode
after 10 rings. A voice prompt invites you
to enter the PIN code. Enter the PIN
(default is 0000) to activate the remote
access feature. You can then turn ON
the answering machine and play the
recorded messages.
2
3
Scroll nto select Activate or
Deactivate and press oSelect.
•
A validation tone is emitted and
the screen returns to Settings
menu.
The following table indicates how to
access the functions of the answering
machine using the telephone keypad.
Key
1
2
3
6
Action
Go to previous message.
Play the message.
Skip to the next message.
Delete the playing message.
Turn on the answering
machine.
15.6.2.2 Controlling the
Répondeur from
an external call
From your external phone, dial
home.
1
7
•
The answering machine answers
and starts playing your greeting
message.
8
9
Stop message playback.
Turn off the answering
machine.
Telephone answering machine (TAM)
66
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
15.6.3 Handset Screening
When Handset call screening is set to
On, you can press oScreen to start
call screening for incoming messages. If
you decide to pick up the call, press t.
Once you pick up, the recording will stop
automatically.
3
Scroll nto select the language and
press oSelect.
•
A validation tone is emitted and
the screen returns to Settings
menu.
Note
If you have multiple handsets, only one
handset can enable handset call screening
for each call.
16 Technical data
1
2
3
Press the mkey in idle mode,
scroll nto Answer Machine, and
press oSelect.
Scroll nto Settings and press
oSelect. Then, scroll nto HS
Screening and press oSelect.
Scroll nto select On or Off and
press oSelect.
Display
•
•
•
Color LCD with backlight
Selectable wallpaper
Selectable color theme
General telephone features
•
•
Caller name & number identification
5 standard + 10 polyphonic ringer
melodies on the handset, and 5
standard ringer melodies on the base
station
•
A validation tone is emitted and
the screen returns to Settings
menu.
•
Wideband synthesis for receiver and
loudspeaker
15.6.4 Setting the Outgoing
Message Langue
Phonebook list, Redial list and Call
log
The language of the default outgoing
messages and the voice prompts is
originally set to FR. However you
can change the language of the default
outgoing messages as follows.
•
•
•
Phonebook list with 200 entries
Redial list with 10 entries
Call log with 50 entries
1
Press the mkey in idle mode,
scroll nto Answer Machine, and
press oSelect.
Battery
•
2 × AAA, 600mAh batteries
2
Scroll nto Settings and press
oSelect. Then, scroll nto
Voice Langue and press o
Select.
Radio specifications
•
•
Frequence Band: 1920 - 1930Mhz
Maximum output power: 120mW
Technical data
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
67
Weight and dimensions
Base:
few moments, the phone will switch
on.
•
•
392 grams
64.5mm × 123.5mm × 199.5mm
(H × D × W)
•
You may have accidentally switched off
the handset. In this case, press and
hold hfor at least 1 second to
Handset:
•
•
128.5 grams
160mm × 28mm × 46mm
(H × D × W)
The handset does not charge!
•
Check charger connections.
Temperature range
•
Operation: Between 0 and 35ºC
(32 to 95ºF).
icon is not blinking during
charge!
•
Storage: Between -20 and 70ºC
(-4 to 158ºF).
•
•
•
Battery is full: There is no need to
charge the battery.
Bad battery contact: Adjust the
handset slightly.
Dirty contact: Clean the batteries
contact with a cloth moistened with
alcohol.
Relative humidity
•
•
Operation: Up to 95% at 40°C
Storage: Up to 95% at 40°C
Communication is lost during a call!
•
•
Charge the battery
Move closer to the base station.
17 Frequently asked
questions
The phone is “Out of range”!
Move closer to the base station.
•
In this chapter, you will find the most
frequently asked questions and answers
about your phone.
17.2 Set-up
Searching... is displayed on handset
and
icon is blinking!
•
•
Move closer to the base station.
Make sure that your base station is
on.
17.1 Connection
The handset does not switch on!
•
Reset your unit and restart handset
registration.
•
Charge the batteries: Put the handset
on the base station to charge. After a
Frequently asked questions
68
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
17.3 Sound
17.4 Product behaviour
Keypad does not work!
Handset does not ring!
Check that the Ring Volume is not set
to no bars (Ringer Off), and make sure
•
Unlock your keypad: Long press *
in idle mode.
the
icon is not displayed on the
screen (see section 12.2.1 - “Set the Ring
Volume”).
The handset warms up when
making a long call and when it is on
the base station!
Caller does not hear me!
Microphone may be muted: During a call,
press s.
•
This is a normal behavior. The handset
consumes energy while calling and
charging.
There’s no dialling tone!
The handset cannot be registered
to the base station!
•
•
No power: Check the connections.
Batteries are empty: Charge the
batteries.
•
Maximum number of handsets (8) has
been reached. To register a new
handset, unregister an existing
handset.
•
•
Move closer to the base station.
Wrong line cable used: Use the line
cable provided.
•
•
Remove and replace the handset
batteries.
Try again by disconnecting and
connecting the base station power
supply and follow the procedure to
register a handset (see section 13.6).
•
Line adaptor is required: Connect the
line adaptor to the line cord.
Caller does not hear me clearly!
•
•
Move closer to the base station.
Move the base station at least one
metre away from any electronic
appliances.
Caller number is not displayed!
•
Service is not activated: Check your
subscription with your network
operator.
Frequent noise interference on my
radio or television!
•
Move the base station as far away as
possible from the electrical appliances. voice mail.
Operator voice mail is managed by
I cannot change the settings of my
•
your operator and not the phone
itself. Please contact your operator
should you want to change the
settings.
Frequently asked questions
69
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
My handset keeps going into idle
mode!
Unable to perform remote
operation
•
If there are no key presses for 30
seconds, the handset will
•
•
•
Make sure the remote access is on
(see Section 15.6.2).
Make sure you entered the correct
remote access code.
Use a touch-tone phone.
Note
automatically return to idle mode. It
will also return to idle mode
automatically when you place the
handset back on the base station (if
auto hang-up feature is on).
If the above solutions do not help,
remove the power from both the
handset and the base. Wait for 1 minute
and try again.
Phonebook entry cannot be stored
and Memory Full is displayed!
•
Delete an entry to free memory
before saving your contact again.
The PIN code is wrong!
•
•
The default PIN is 0000.
Reset the handset to revert to the
default PIN code if it has been
changed before (see “Reset Unit” -
Section 13.8).
The answering machine does not
record calls.
•
Make sure the answering machine is
connected to the power adaptor, and
the power adaptor is plugged into
mains supply which is switched on.
Check if the answer machine is off, or
Answer only mode is selected.
Check to see if the answering machine
is memory full. If so, delete some or
all messages.
•
•
•
Try switching off the power at the
mains socket, and then turn it on again
after 1 minute.
Frequently asked questions
70
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
18 INDEX
A
Activate/Deactivate handset loudspeaker
mode 38
Change Call Forward Activation
Codes 57
Change Call Forward Deactivation
Code 57
Change Call Forward when Busy
Activation Codes 58
Change Call Forward when Busy
Deactivation Code 59
Change Call Forward when Unanswered
Activation Codes 59
Answer an external call during
intercom 39
Change Call Forward when Unanswered
Deactivation Code 60
B
C
D
INDEX
71
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
L
M
N
E
O
F
P
G
H
Play, Record, or Delete an Outgoing
Message 64
I
R
K
INDEX
72
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
S
Turn the Répondeur On/Off
from the Handset 64
U
V
W
X
Y
Setting the Outgoing Message
Langue 67
Switch between an internal and external
call 39
T
UCZZ01939UZ(0)
INDEX
73
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
©2008 Koninklijke Philips Electronics N.V.
All rights reserved
Reproduction in whole or in part is prohibited without the
written consent of the copyright owner
Document order number: 3111 285 47071 (US-EN)
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
|