1
11/03
P/N 21185801
© COPYRIGHT 2002 by HUFFY SPORTS
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
HARDWARE IDENTIFIER (BOLTS)
Item #32 (2)
Item #8 (1)
Item #43 (5)
Item #11 (1)
Item #31 (4)
Item #15 (2)
Item #35 (1)
Item #47 (1)
Item #34 (1)
HARDWARE IDENTIFIER (NUTS & WASHERS)
Item #37 (1)
Item #39 (5)
Item #17 (4)
Item #38 (1)
Item #36 (1)
Item #16 (8)
Item #9 (1)
Item #12 (6)
Item #13 (1)
Item #18 (2)
Item #40 (1)
* You may have extra parts with this model.
11/03 P/N 21185801
3
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
HARDWARE IDENTIFIER (STEEL SPACERS & RODS)
Item #7 (1)
Item #33 (2)
HARDWARE IDENTIFIER (PLASTIC SPACERS & CLIPS)
Item #42 (4)
Item #20 (12)
HARDWARE IDENTIFIER (OTHER)
Item #48 (1)
Item #46 (1)
Item #45 (1)
Item #30 (1)
P/N 21185801
11/03
4
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
15.
WARNING: TWO PERSON MINIMUM REQUIRED FOR THIS
PROCEDURE. NOT FOLLOWING RECOMMENDATION MAY
RESULT IN BODILY INJURY.
Support pole on sawhorse. Attach upper and lower elevator tubes (44)
to upper pole section (4) using bolts (43) and nuts (39) as shown.
Attach pole cap (22) as shown.
16. Fit rim (21) securely into bracket (46) as shown.
Install reinforcement bracket (48) onto “T” bolt (47) as shown.
1. Remove contents from tank (1).
Install spring (45) onto “T” bolt (47) as shown.
Install special nut (40) and washer (38) onto “T” bolt (47).
Tighten nut (40) until flush with end of “T” bolt (47).
2. Correctly identify each pole section and mark indicated distance from
ends with tape as shown.
WARNING: USE OF THIS PRODUCT WITHOUT PROPER
INSTALLATION OF SMART CLIPS, OR WHEN ALL SMART CLIPS
ARE NOT PRESENT COULD RESULT IN BODILY HARM. BE SURE
TO FOLLOW DIRECTIONS CAREFULLY.
3. IMPORTANT! Center alignment slot of middle pole section (5) in a
lower hole of top pole section (4) as shown. While maintaining
alignment, bounce pole top (4) and middle section (5) together as shown
until they no longer move toward taped reference mark. Upright
assembly. NOTE: Pole sections should have a 3-1/2" (9 cm) minimum
overlap.
17. Install net clips as shown. (See illustration)
18. Install net as shown. (See illustration)
4. IMPORTANT! Center alignment slot of lower pole section (6) in a
lower hole of middle pole section (5) as in step 3. While maintaining
alignment, bounce assembly and lower pole section (6) together as
shown until they no longer moved toward taped reference mark.
NOTE: Pole sections should have a 3-1/2" (9 cm) minimum overlap.
5. Install rod (7) through holes in bottom pole section (6) and eyebolt (8).
19.
WARNING: DO NOT LEAVE ASSEMBLY UNATTENDED WHEN
EMPTY, MAY TIP OVER.
WARNING: TWO PERSON MINIMUM REQUIRED FOR THIS
PROCEDURE. NOT FOLLOWING RECOMMENDATION MAY
RESULT IN BODILY INJURY.
Roll the completed assembly to the desired playing area. Insert the
T-strap (14) through the slot on the back of the base as shown. Secure
the unit to ground by twisting the tie down stake (23) into the ground and
hooking the T-strap (14) onto the tie down stake (23). Fill tank with 33
gallons of water.
6. Install wheel axle (2) through wheel carriage (19) and install wheels (3)
onto wheel axle (2) with spacers (17) as shown. Insert pole assembly
into tank assembly as shown. Secure bottom pole (6) section to tank
and wheel carriage as shown. A deep socket is recommended.
NOTE: Two people recommended for this step.
IMPORTANT! Add two gallons (7.6 Liters) of non-toxic antifreeze in
sub-freezing climates.
IMPORTANT! DO NOT OVER TIGHTEN.
7. Secure base struts (10) to pole using bolt (11), washers (12), and nut
(13), as shown. Rotate the non-secured ends of base struts (10) as
shown.
20. Apply the height adjustment and moving label (25) to the front of
the pole as shown.
WARNING: TIGHTEN BOLT (11) IN LOCKNUT (13) UNTIL FLUSH
(EVEN) WITH LOCKNUT’S OUTER EDGE.
WARNING: DO NOT ALLOW CHILDREN TO ADJUST HEIGHT.
8. Secure base struts (10) to base using bolt (15), washers (12), and
nut (16).
9. IMPORTANT! Test fit bolts into holes of backboard brackets (29)
and carefully rock them in a circular motion to ream out paint from
holes if necessary.
Fit spacer (33) into pawl (27). Then continue to assemble as shown.
Tighten completely.
10. Assemble elevator tubes (44) to ratchet components as shown. Tighten
completely. IMPORTANT! It is necessary for all parts to be installed
properly for this mechanism to work safely and properly.
11. Secure pawl (27) in place with clevis pin (30) and washers (18) as
shown.
12.
13.
WARNING: USE EYE PROTECTION WHEN INSTALLING SPRINGS.
Stretch spring (41) into position with pliers.
WARNING: TWO PERSON MINIMUM REQUIRED FOR THIS
PROCEDURE. NOT FOLLOWING RECOMMENDATION MAY
RESULT IN BODILY INJURY.
Insert “T” bolt (47) through Slam Jam bracket (46) as shown.
Secure Slam Jam bracket (46) and backboard bracket (29) assemblies
to backboard. Bend upper halves of backboard brackets (29) to line up
with holes in backboard and secure with bolts (32) and nuts (16).
Tighten completely.
WARRANTY CARD:
Please remember to complete your product
registration form either
on-line at: www.huffysports.com/warrantycard
or mail-in the enclosed postcard.
14. Attach upper elevator tubes (44) to backboard brackets (29) using
spacers (42) bolt (43) and nut (39) as shown.
5
11/03
P/N 21185801
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
PARTS LIST - See Hardware Identifier
Item Qty. Part No. Description
Item Qty. Part No. Description
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
2
1
4
2
2
1
1
1
1
1
5
1
1
4
5
4
1
1
1
1
1
1
900846
206305
203113
203038
201129
240017
206360
203493
201124
203470
206340
203795
201125
201642
206304
908002
203472
900033
203796
200318
203365
202587
Backboard Bracket
1
1
1
2
1
1
1
1
1
1
2
1
6
1
1
2
8
4
2
1
12
1
1
1
2
1
1
1
1
206657
200628
226401
900217
904840
900136
202820
202822
203063
906206
201625
203218
203220
201568
205528
203100
201651
206303
200627
201219
Tank, (Black)
Clevis Pin 1/4 x 2-9/32 Large
Bolt, Hex Flange , 5/16-18 x 2 1/2 Long
Bolt, Carriage, 5/16-18 x 2-3/4 Long
Spacer .402 I.D. x.500 O.D. x 1.8 Long
Bolt, Hex 1/4-20 x 2-1/4 Long
Bolt, Hex 3/8-16 x 2.65 Long
Lock Nut 1/4-20
2
Wheel Axle
3
Wheel, 4“ (Black)
4
Top Pole Section
5
Middle Pole Section
Bottom Pole Section
Rod, 3/8 O.D. x 4-3/4 Long
Eyebolt, 3/8-16 x 2-1/2 Long
Nylon Insert Lock Nut, 3/8-16
Tank Strut
6
7
8
Lock Nut 3/8-16
9
Washer Flat, Slam Jam
Nut 1/2-13
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Bolt, Hex Head, 5/16-18 x 3-3/4 Long
Washer, Flat, 3/8 I.D.
Nylon Insert Lock Nut, 5/16-18
Anchor, T-Strap
Nut, Special, Slam Jam
Return Ratchet Spring
Spacer .530 I.D. x.63 O.D. x .5 Long
Bolt 1/2-13 x 6-5/16 Long
Elevator Tubes
Bolt, Hex Flange, 5/16-18 x 1 Long
Nut, Hex Flange, 5/16-18
Spacer .500 I.D. x .25 Long
Washer 1/4 Flat
Spring, Black, Slam Jam
Bracket Slam Jam
T-Bolt, 3/8-16 x 5” Large
Bracket, Reinforcement, Slam Jam
Rim Spacer, Plastic
Wheel Bracket
Clip, Net Holder
Rim
Spacer, .530 I.D. x 1" Long
206219
203124
203617
201257
Cap, Pole Top 3”
Stake, Tie Down
Plug Cap
Label, Height Adjustment and Moving
Net
201160
201159
Pawl Lever
Ratchet
NOTE: Hardware kit is designed for more than one style of basketball system.
Not all hardware will be used.
P/N 21185801
11/03
6
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
IMPORTANT! WRITE MODEL NUMBER FROM BOX ONTO PAGE 1 OF THIS OWNERS MANUAL
4
TOP POLE 31”
1.
2.
1
5
MIDDLE POLE 43”
BOTTOM POLE 43”
6
3.
4.
4
IMPORTANT!
(See Text Page)
5
5
Note
(See Text Page)
IMPORTANT!
(See Text Page)
4
Note
(See Text Page)
6
WOOD SCRAP
WOOD SCRAP
7
11/03
P/N 21185801
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
6
5.
6.
6
7
7
8
IMPORTANT!
(See Text Page)
8
Note
(See Text Page)
9
19
17
3
17
3
2
7.
12
12
6
13
11
10
6
10
1
10
P/N 21185801
11/03
8
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
8.
10
15
12
1
12
16
9.
29
36
37
33
33
34
27
35
9
11/03
P/N 21185801
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
10.
27
39
29
42
39
50
44
17
28
42
43
43
17
IMPORTANT!
(See Text Page)
44
11.
12.
WARNING
SEE TEXT PAGE
18
27
44
30
18
29
41
44
P/N 21185801
11/03
10
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
16
13.
29
16
44
47
49
32
46
WARNING
SEE TEXT PAGE
31
14.
44
39
42
42
44
43
44
44
11
11/03
P/N 21185801
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
39
39
15.
44
4
44
22
44
44
43
43
16.
21
40
47
38
45
46
48
P/N 21185801
11/03
12
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
Install net clips.
Installez les pinces du filet. Netzhalteklammern anbringen. Instale los sujetadores de la red.
17.
WARNING: Use of this product without proper installation
of net clips, or when all net clips are not present could result in
bodily harm. Be sure to follow directions carefully.
CLIP “ARM”
" BRAS " DE LA
PINCE
AVERTISSEMENT : L'utilisation de ce produit sans installer
correctement ou toutes les pinces du filet risque de causer des
blessures. Veillez à suivre scrupuleusement les instructions.
CLIP-ARM
WARNUNG: Ein Gebrauch dieses Produkts ohne ordnungsgemäß
angebrachte Netzhalteklammern bzw. ohne den Gebrauch der
Netzhalteklammern kann Verletzungen nach sich ziehen. Die Anleitung
genau befolgen.
"BRAZO" DEL
SUJETADOR
CLIP “BODY”
" CORPS " DE LA PINCE
CLIP-HAUPTTEIL
ADVERTENCIA: Si este producto se usa con los sujetadores de la red
incorrectamente instalados, o si no están todos presentes, se pueden
ocasionar lesiones corporales. Asegúrese de seguir cuidadosamente
las instrucciones.
"CUERPO" DEL
SUJETADOR
21
Insert one “arm” of clip (21) into ram (20) as shown. Twist “body” of clip slightly so that second “arm”
slides over the top of the first “arm” as shown.
Push in direction indicated by arrows.
Insérez un " bras " de la pince (21) dans l'éperon (20), comme illustré. Tournez légèrement le corps de la
pince de sorte que le second bras glisse par-dessus le premier, comme illustré.
Einen Arm des Clips (21) wie gezeigt in die Spirale (20) einsetzen. Den Hauptteil des Clips etwas drehen,
sodass der zweite Arm wie gezeigt oben über den ersten Arm geschoben werden kann.
A
Introduzca un "brazo" del sujetador (21) en el accionador (20) como se muestra. Tuerza ligeramente el
"cuerpo" del sujetador de manera que el segundo "brazo" se deslice sobre el primer "brazo" como se
muestra.
20
Push second “arm” back and into ram as shown.
Poussez dans le sens des flèches.
In die durch die Pfeile angezeigte Richtung schieben.
Empuje hacia la dirección que indican las flechas.
B
Twist “body” of clip slightly again to spread “arms” of clip.
Clip “arms” must be flat and touching edge to edge as shown, not overlapping.
Tournez légèrement le corps de la pince une nouvelle fois pour en étaler les bras.
Den Hauptteil des Clips noch einmal leicht drehen, um die Arme des Clips zu spreizen.
Otra vez tuerza ligeramente el "cuerpo" del sujetador para abrir los "brazos" del
sujetador.
C
13
11/03
P/N 21185801
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
21
18.
Install net.
SIDE VIEW
VUE DE CÔTÉ
SEITENANSICHT
VISTA LATERAL
Installez le filet.
Das Netz anbringen
Instale la red.
NETCLIP
PINCE DE FILET
NETZHALTEKLAMMER
SUJETADOR DE LA RED
26
20
NET
FILET
NETZ
RED
Insert net into bottom of clip as shown.
Insérez le filet dans la base de la pince, comme illustré.
Das Netz wie gezeigt unten in den Clip stecken.
Introduzca la red en la parte inferior del sujetador como se muestra.
Twist net until it snaps into position.
Net must be centered through clip.
NETCLIP
PINCE DE FILET
NETZHALTEKLAMMER
SUJETADOR DE LA RED
SIDE VIEW
VUE DE CÔTÉ
SEITENANSICHT
VISTA LATERAL
Tournez le filet jusqu'à ce qu'il s'enclenche en position.
Das Netz drehen, bis es einschnappt.
Tuerza la red hasta que quede conectada en su posición.
Le filet doit être centré dans la pince.
Das Netz muss im Clip zentriert werden.
NET
FILET
NETZ
RED
La red debe quedar centrada a través del sujetador.
P/N 21185801
11/03
14
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
19.
24
WARNING
SEE TEXT PAGE
24
14
IMPORTANT!
(See Text Page)
23
20.
25
10 ft.
(3.05 m)
15
11/03
P/N 21185801
Télécharger from Www.Somanuals.com. All Manuals Search And Télécharger.
|